Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
Power limit is a PIa and card clocks/voltage will bounce all over the place.
Get the Skyn3t bios on it.
Is your card the newer revision with bios 80.80.34.00.15 ?

Reference cards can still punch above their weight if you keep them cool enough, even with as little as 1.2v. Mine did 1385 core in Valley.
That newer card rev and bios rev.
The new modded bios of that build for each Vendor are appearing on the OC.net site.
He did my EVGA SC one for me before it went public as the older modded EVGA SC Bios was not much help as I have the newer bios.
What make/model is your card exactly (not sure if the link is allowed here)?
happy that it's sorted, always my first port of call if it all goes **** up.
Were it me, i'd get the skynet bios on there first if you haven't and give that a go.
Your EVGA card did 1.2v anyhow but many were lower, 1150-1175mv.
Read the thread on OC.NET, all the question have been asked and answered many times.


Strange as sioncer you have same card as myself and Skyn3t disables Boost card will run at Base clock of about 1006mhz, so 1250mhz would need +1244 not +179.
Remember the Card runs in Steps/straps, there is no 1250mhz :
![]()