Overclocking Help.

Uncleiven · 11 Oct 2007 at 20:05

Right ok I want to overclock my Q6600 now I have my new setup and my temps are good

.

Want to try 3.0GHz at first so looking at the below what do I need change the multiplier to and the V.core

Thanks

Ad

hardc0re_tid · 11 Oct 2007 at 20:07

what are your temps and what cooling?

Jokester · 11 Oct 2007 at 20:07

You need to increase the FSB to 333MHz and you probably won't need to increase Vcore. Depending on your RAM you may need to drop a divider to keep it at stable speeds.

Jokester

Uncleiven · 11 Oct 2007 at 20:08

hardc0re_tid said:
what are your temps and what cooling?

http://forums.overclockers.co.uk/showthread.php?t=17789487

hardc0re_tid · 11 Oct 2007 at 20:10

Uncleiven said:
http://forums.overclockers.co.uk/showthread.php?t=17789487

cool, might be a good idea to edit out the sweary in your first post before a mod sees it

EDIT: and post 7

Uncleiven · 11 Oct 2007 at 20:11

Jokester said:
You need to increase the FSB to 333MHz and you probably won't need to increase Vcore. Depending on your RAM you may need to drop a divider to keep it at stable speeds.

Jokester

cheers mate.

My RAM is OCZ PC2-6400 800Mhz 4GB kit

So what do I need to do in the BIOS to change the divider

Sorry if I sound really stupid but I want to make sure I doo it right

Uncleiven · 11 Oct 2007 at 20:12

hardc0re_tid said:
cool, might be a good idea to edit out the sweary in your first post before a mod sees it

Haha. Thanks, have done

Uncleiven · 11 Oct 2007 at 20:16

Jokester said:
You need to increase the FSB to 333MHz and you probably won't need to increase Vcore. Depending on your RAM you may need to drop a divider to keep it at stable speeds.

Jokester

should I also set the voltage stuff to manual?

Uncleiven · 11 Oct 2007 at 22:12

Well I increased my FSB to 333 but it didnt work. System wouldnt boot and then it reset it self back to normal.....

?????