Overclocking Help

coops1992 · 30 Jan 2013 at 07:24

Hello, im very new to overclocking and think i have just about got there and just wanted some help with my CPU-z screen shot.

Does it look stable and am i right in thinking that its overclocked to 4.5Ghz shown in the red box or am i mis-reading it?

Any Suggestions for ways to make it better?

Thanks
Coops1992

Ur round next · 30 Jan 2013 at 07:42

Yeah your clcoked at 4.5 but do you really need 1.4v?

whats your temps in prime 95?

I would try lowering your Vcore mate

coops1992 · 30 Jan 2013 at 08:23

Ur round next said:
Yeah your clcoked at 4.5 but do you really need 1.4v? whats your temps in prime 95?

I would try lowering your Vcore mate

I think my asus board is set to auto for volts, at full stress for half hour it was 80c

On idle my voltage is 1.048V

what voltage would you recommend?

Ur round next · 30 Jan 2013 at 08:47

Its hit and miss mate, I would start at 1.32v Prime it, if any fails up it by 0.05v at a time until stable. If it passes at 1.32 lower the vcore evan more

80c Is not to bad i take it your on air?

coops1992 · 30 Jan 2013 at 09:02

Ur round next said:
80c Is not to bad i take it your on air?

Yeah i am on air, looking at getting a self contained water cooler 240mm rad. any suggestions? i know corsair have the 100i but with mixed reviews

I finaly pulled my finder out and got the 3pin fan extansion cable out of the loft (having been up there for 6 months since i moved house) with the rear fan now hooked up, cpu is at 72c after 58 mins at 100% Stress

wazza300 · 30 Jan 2013 at 12:16

try high llc and +0.010 offset and see how it performs,might need +0.015v offset you would need to test

coops1992 · 30 Jan 2013 at 17:51

ok brilliant ill try this tomorrow. Thanks