• Notice regarding image hosts and attachments. See here.

Overclocking RAM... for a slight noob.

Associate
Joined
13 Jul 2010
Posts
118
Location
Brighton
SO, Manually overclocking my 920 and my RAM... few questions.

Using a P6X58D-E mobo, pushed to 20x180, which has left me with, according to CPU-Z 3.77GHz... which I don't get? Is it the Intel's Turbo thing pushing it over 3.6?

And now to my main question...

I have 6gb Dominator GT, and wound up with a 4gb stick of XMS3 for Crimbo, so I've mixed that in there...

If I set the DRAM frequency to 1800MHz ish, I only get the Dominator RAM showing up - but if I lower the frequency down to about 1088 (I think that's what it was anyway) I get all 10gb showing up. Any setting above that and I go back to 6gb...

Am I better off with the 6 at the higher frequency or 10 at the lower? Because I honestly don't know how to put frequency into perspective when looking at performance.

Sorry if I am asking infuriating, mind numbing questions. And thanks in advance.

Josh
 
Hey, firstly you need to try n reduce your sig down to 4 lines

Secondly re the last bit, DDR stands for double data rate, so you double the 540 which is 1080, thats the speed its running at

Thirdly, it will depend on what youre using your PC for, however by running it like this you are not running the RAM in triple channel mode, which is what its optimised for, prob not what you want to hear bout a xmas present sry
 
Hey, firstly you need to try n reduce your sig down to 4 lines

Secondly re the last bit, DDR stands for double data rate, so you double the 540 which is 1080, thats the speed its running at

Thirdly, it will depend on what youre using your PC for, however by running it like this you are not running the RAM in triple channel mode, which is what its optimised for, prob not what you want to hear bout a xmas present sry

Will get on the sig after this post. And THANK YOU. To be honest I'd rather hear the truth. I can just sell on the xms3. Not fussed about it to be honest as I've been getting great performance on 6gb with no OC.

PS I use my computer for producing music, and I'm in the process of learning about the technicalities behind PCs. I'm always trying to figure something new out, or learn something new... next mission - learn about CAS latency hehehe.

Thanks again for answering.
 
PS Can't be mad at Mum for buying me RAM for Christmas - how many mum's go on OC and look for know to look for DDR3 for their little boys computer hehehe.
 
Hey no worries
If youre after swatting up on memory, then have a read of this, its actually Anandtechs review of the Asus Rampage Formula mobo but goes into a lot of detail about memory, timings and its effects on performance, just ignore the stuff thats specific to that mobo and read around the memory stuff, as its an older board its referring to dual channel DDR2 but the principles are the same for all RAM
 
Back
Top Bottom