overclocking settings

rhubarb4

rhubarb4

rhubarb4

Associate
Joined
3 Dec 2005
Posts
35
hi has anyone got a setup like mine that can give me sum overclocking settings i can copy my system is

dfi lanparty nf4 sli dr mobo
2 gig (1gig single strips) of crusial ballistix tracer memory
amd 64x2 4400+ processor
bfg 7800 gt pci express card
Hiper HPU-4B580 Type R 580W Modular ATX2.2 PSU - Blue

Thanks for any help guys
 
There is loads of info on the here and on the web in general

click me to go to DIY Street

is my favourite resource.

A cut and paste probaly won't work, as there are too many differences, even between identical kit. To do it well, you need to do it properly, and it takes time.

Good luck, and let us know how you get on.
 
rhubarb4 said:
hi i have altered the fsb to 210 but i have no htt to alter to 3/4 i can t find htt on there please help thanks
Click to expand...

Try the "Genie Bios" section.

I would strongly recommend you read this first :

http://www.diy-street.com/forum/showthread.php?t=20823

http://www.diy-street.com/forum/showpost.php?p=203167&postcount=3

Step by step guide to find your max. CPU mhz and your max.RAM mhz.

Each board and set-up will be different , so there is no cut and paste bios settings, unfortunately.

Good Luck and read the guide BEFORE you try, it is excellent

(DFI NF3 250GB / AMD 64 3700+ )

Mark
 
Agreed, read all you can on dfi/diy street a quick google found This thread. I highly recommend bigtoes 704-2bt bios for the dfi nf4 is about the best bios i used on my dfi. Basics reduce htt to 3, use a memory divider if your balistics is pc3200 and up the fsb, if you hit instability up your vcore a notch but keep an eye on the temps and stay below 1.5v, stay below 50 degrees if you can and all will be well, good luck :)
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom