Overclocking using GA-970A-UD3P MOBO

[dazayit]

Having issues when overclocking.
I have tried everything to get it stable but with limited succes at best.
I have tried disabling all the power managment stuff.
tried plenty different voltages but nothing stable.
During overclock, i start getting bsod, crashing, double booting (on initial boot, start, stop waits a 1 second or 2 then will boot.

thought this was upgrade from my previous board (cost 30 quid brand new)which i was able to get 4.5ghz stable with not much problem at 1.5v

Specs:
AMD 6300
MOBO in title
corsair 750 PSU 80+ gold
8gig ram
Cooler master water cooling for cpu forget the name seitan or somthing, normally keeps it cool during heavy gaming around 45 to 50 max.
Gigabyte R9 270x 4gig
Smasung evo 240 ssd
seagate 500g HDD

Anyone offer any advice for some settings???
Thanks

 

[dazayit]

bump

 

[Hagar]

Does this board have load line calibration (LLC)?

Are you overclocking ram as well? What HT and NB frequencies?

 

[dazayit]

HT around 2400
NB around 2200
both default
i think not got it infront of me at work at moment
Ram was clocked up slightly but get same results if ram is clocked or not

yes i have LLC had up on extreme and all other settings aswell same results.

my bios also went corrupt twice during overclocking and had to restore itself

The stop, start thing is annoying me more as i dont understand why it does it.

 

[Woowl]

Out of curiosity what are the temps and voltages showing when you dont have it overclocked ? I think on my spare for stock 4.1 i have 1.368 on full load.