• Notice regarding image hosts and attachments. See here.

Partial new build wont boot.

Associate
Joined
29 Sep 2007
Posts
67
Hi all,

I have bare a bare bones upgrade to my old system (HP Pavilion), New CPU, Motherboard, Memory, but kept my old hard drive, dvd-rw, peripherals etc

Put my new system together and everything's fine but naturally it wont boot in to OS, Not to worry as I'm planning on doing a new install anyway.

So pop in my Windows 7 DVD and I am prompted to enter a proper boot media. This is strange as it boots from other computers in the house. so i try my Ubuntu disk which gives the same problem.

The drive is working fine, does anyone know why it wont boot to an installation disk?

I have yet to try from a USB drive and would rather not have to fuss around doing so!

Are HP devices protected against booting to installation media or something? as I have had the same problem with a really old HP machine when XP was first around which i never resolved.

Thanks

Rob
 
Apologies if I've misread but it just says you've put the disk in the drive, not changed boot order?
Is the drive detected in the bios ok? Is it and IDE disk drive or Sata?
 
No I'm only pulling your leg, its the most commonly asked question yet in most cases is completely unnecessary lol!

Yes the drive is detected in the BIOS, and its SATA: Toshiba Samsung TS-H653
 
Well I did guess you would have as you'd built it yourself. Had to ask though :)
Don't suppose you have another dvd drive to try?
Failing that I would put it onto usb and do that. It is a lot quicker than installing from disk, just recently done it myself.
I can't see how they could lock out boot media? Usually the bios would be locked. The fact that ubuntu doesn't work either though...I'm stumped :(
 
Would it not be a best idea to perhaps, put the HDD in another machine, get all the bits you want off of it and then format it and install Windows from then on? Or have I completely missed the problem? xD
 
Are both SATA cables properly attached? Does sound like a boot order issue if it's not reading either discs.

Best bet would be to try from USB instead then see if it boots the USB. Might be a dodgy drive or needs drivers etc.
 
Would it not be a best idea to perhaps, put the HDD in another machine, get all the bits you want off of it and then format it and install Windows from then on? Or have I completely missed the problem? xD

It wont boot from another machine. I think the days where you could move Hard drives around easily are gone, each installation of windows is configured the machine its installed on and rarely boots when moved to another machine. Hence my problem here :D
 
Hyburnate was suggesting you connect the hard drive as a slave drive in another PC and not as the master boot drive. You could then take the formatted drive and place it in your new system and try to install windows again.

Wow, how did i miss that? must have been a brain fart moment!

Thanks for everyone's help, It did boot successfully from USB, so all i can think of is a lack of support for the older DVD-RW drive?

Its now fully working!

Cheers

Rob
 
Back
Top Bottom