PB5 Overclock help ?

MofoKilla

MofoKilla

MofoKilla

Soldato
Joined
28 Nov 2005
Posts
2,955
Hi guys can anyone here help me solve my problem.

today i went to ocuk a brought some OCZ 4GB (4 x 1GB) PC2-6400C4 Dual Channel Platinum Revision 2 XTC Series DDR2

to replace my xms2 5300.

Everything is fine at stock settings but when i boot the first screen says the ram is running at 4300?

i tried upping the Mem volts to 2.20 but stil nothing.

My other settings are:

Cpu freq 378x9
Performance -turbo
pcie - 100
pci syn - 33.33
cpu vcore - 1.45
Dram Freq - ? ( anything but auto pc wont boot??)


other settings i aint sure on are
fsb term - auto
meh chip - auto
ich chip - auto

tried the timings at 4.4.4.12 / 4.4.4.15 / 4.4.4.10

Any of you guys recommend anything ?

thanks.
 
MofoKilla said:
Hi guys can anyone here help me solve my problem.

today i went to ocuk a brought some OCZ 4GB (4 x 1GB) PC2-6400C4 Dual Channel Platinum Revision 2 XTC Series DDR2

to replace my xms2 5300.

Everything is fine at stock settings but when i boot the first screen says the ram is running at 4300?

i tried upping the Mem volts to 2.20 but stil nothing.

My other settings are:

Cpu freq 378x9
Performance -turbo
pcie - 100
pci syn - 33.33
cpu vcore - 1.45
Dram Freq - ? ( anything but auto pc wont boot??)


other settings i aint sure on are
fsb term - auto
meh chip - auto
ich chip - auto

tried the timings at 4.4.4.12 / 4.4.4.15 / 4.4.4.10

Any of you guys recommend anything ?

thanks.
Click to expand...


mine says the same at boot - dont worry about it its fine its because of the divider you are running.

put your memory at the stated voltage on the ram and change the performance mode to standard.

i run my ram at 1:1 with a fsb of 850, my e6600 with a 8x multiplier and cpu fsb of 425

if you need i could post you some screen shots
 
Yeah that would be great if you could mate its pickling my head.

Dont mean to sound stupid but what do ya mean when u say 1:1 ?

so you think i would be better off with a x8 multiplier ?
 
Keeny1979 said:
mine says the same at boot - dont worry about it its fine its because of the divider you are running.

put your memory at the stated voltage on the ram and change the performance mode to standard.

i run my ram at 1:1 with a fsb of 850, my e6600 with a 8x multiplier and cpu fsb of 425

if you need i could post you some screen shots
Click to expand...

What vCore you running?
 
1.52 ?

The first boot is saying the mem is running at 7100 now ?? even thou its 6400

Im totally lost with the memory and timings :confused:

can anyone help me out on this one
 
MofoKilla said:
1.52 ?

The first boot is saying the mem is running at 7100 now ?? even thou its 6400

Im totally lost with the memory and timings :confused:

can anyone help me out on this one
Click to expand...


sorry its been so long, i will help you as much as i can even though i upgraded to a q6600

just gonna find the camera
 
right here goes try these settings

they will get you too 3.2 it should do 3.4 by upping the cpu frequency to 425

on the frequency and voltage screen

DSC_0002Medium-1.jpg


the northbridge screen you will need to change your settings to

disabled
disabled
5
5
5
15
5
30
10
10
10
11
disabled

DSC_0004Medium.jpg


and the cpu screen

DSC_0003Medium-1.jpg
 
MofoKilla said:
Is it even possible to run a 6600 at 3.6 with pc6400 ram ??

no settings seem to work what so ever or is this chip at it limit?
Click to expand...

I have reached 3.6GHz (400 x 9). It's Orthos stable with 1.525V on Vcore with Corsair PC6400 XMS 2, Mem Timings are 5, 5, 5, 15 and memory Vcore of 1.95V.

Idle @ 3.6GHz = 42c
Load @ 3.6GHz = 53c max.

Beware, I would not disable "memory remap feature" (shown in the earlier images above) as this will make windows only recognise 3GB of your 4GB of OCZ memory.

;)
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom