pc FREEZING up

[funksteruk2]

when iam using imageburn and have cpu-z, coretemp, speedfan going and the titnernet the pc freezes.


I thought this might be to do with the O/C i had but ran it at stock and its still freezing up


ive updated the n-force driver jsut managed to to use imageburn on stock settings while writting this so is it a fault with my O/Cing

they were at 1600FSB, volts at 1.35635(this setting wont load now for some reason) memory at 667/333 memory volts at 1.90

cpu is a 6300


its doing my head right in

 

[w3bbo]

raise your vcore a little or you ram if thats overclocked. A full spec including your current settings would help a lot m8.

 

[funksteruk2]

raise your vcore a little or you ram if thats overclocked. A full spec including your current settings would help a lot m8.

current settings are at stock, when it was freezing it was set at the above


mobo ECS NF650iSLIT, memory OCZ special ops edition 5300, cpu as above, gfx card 7900gs, cooler artic pro7, disc drives hitachi deck star 160GB maxtor 80GB samsung spin point 20GB case silverstone TJ06

 

[funksteruk2]

*BUMP*

plus last night when i went to bed i got a BSOD

not sure if its a memory setting or if its to do with the dvd writer

can anyone advise me on this please

 

[matt_fsr]

Funkster - what PSU you using?

As a start, id suggest disconnecting all HD's except your primary boot disk and seeing what happens - also, did you set all your RAM timings to default? If not, id drop them all to standard or slacker than standard. Also try using 1 stick of RAM if you have 2, see if that makes any difference.

I'll keep an eye on this thread, see how it goes. Having just had the world of problems with my m/board, I feel for ya!

 

[Chris Beard]

Have you tried backing up your files and doing a fresh install of windows?