• Notice regarding image hosts and attachments. See here.

PC Problems

Soldato
Joined
15 Feb 2011
Posts
3,099
i suffered a brownout/power surge. the pc was booting and it wouldnt turn on.

now i have replaced the psu, replaced the mobo and it still wont turn on. im getting a power light on the mobo which is the "standby power" on the asus m5a99x evo.

however when i press the power button, no fans spin, none of the motherboards boot lights turn on and i dont get a signal on the motherboard.

anyone suffered similar or know any tricks?
 
hehe you again :) hello.

yep the power button seems to be in the right place. proper contact and ive switched it round once or twice just in-case i got it the wrong way round.
 
lol. Me again in a good way!? :P

Are all the power connectors from the PSU plugged in? They'll be a 4/8 pin for the CPU, 1/2 PCIe connectors for any graphics cards etc... It's a good idea to check these over.
 
heh yes, just good to see someone helping out, especially as this is baffling me.

yep power connectors are ok. the motherboard shows that it has standby power and the 8 pin cpu power can only go in one way and it looks like its definitely connected.
 
the thing is it doesnt even get to the ram stage. there is literally nothing apart from the power standby light. the motherboard has lights for each componant so when it boots you know of any failures.

glad its not just me stumped.
 
Ah yeah I know, my Asus board does a similar thing. That is very odd!

Tbh, unless its something strange it does seem like its not being "told" to turn on... i.e. the power button doesnt work or something!?
 
well yes. its either that or the processor, the only thing i havent swapped that isnt involved in the startup but im cautious about spending another 130 quid to be honest. i would want another x6, not bulldozer and they still command the same price as when i bought it a year or so ago.

i cant think of any way to test the power button connection to the motherboard.
 
What about trying the reset buttom instead? (as in plugging it in as the power button?)

Do you have the manual to check the connector is in the right place/way round?
 
good idea and i just tried it both ways round but it didnt work.

im going to have to go with a new cpu and see if its the problem. :( thanks for your help tho.
 
Is the PSU you fitted known to be good? You can bridge the power block with a paperclip to fool it into powering up (google it).

You can briefly press a flatheaded screwdriver against the two power pins on the mobo header to emulate a switch. Might be best to take it out of the case and sit it on the box it came in to make life easier ;)
 
Back
Top Bottom