Phanteks Luxe

xxtomox · 23 Oct 2015 at 17:28

Hi all trying to connect the Phanteks Luxe case cables to my x99 motherboard. connected USB 2 & 3 cables along with HDD LED light. But struggling to figure out where rest of cables go. according to manual my motherboard has slot on motherboard for Reset but I actually have 2 x 2pin cables for reset? any help? I don't seem have a cable for power button

Radec · 23 Oct 2015 at 17:32

I the case should have those really slim wires for the reset and power. That connect to the pins of a motherboard.

stulid · 23 Oct 2015 at 17:34

Its the ones all the left.

Power and reset are above each other.

xxtomox · 23 Oct 2015 at 17:37

that's problem. I have two pins both say reset

Radec · 23 Oct 2015 at 17:42

Does it say that on a sticker around the cable?

xxtomox · 23 Oct 2015 at 17:44

no stick on the cables.

Radec · 23 Oct 2015 at 17:48

I'm guessing one was meant to say power. You could hook them into the power + reset pins on the mobo, and try switching on with the switch on top of the Luxe. If nothing, try switching the pins around.

xxtomox · 23 Oct 2015 at 17:48

no stickers on cables

xxtomox · 23 Oct 2015 at 17:49

could it damage my pc if they are connected wrong places?

Radec · 23 Oct 2015 at 17:51

You should have 5 panel connectors: Power LED +/ Pwer LED -/ Power SW/ Reset SW/ H.D.D LED.

xxtomox · 23 Oct 2015 at 17:54

I have got H.D.D LED/ Reset SW & Reset SW

Radec · 23 Oct 2015 at 17:55

1 sec

xxtomox · 23 Oct 2015 at 17:58

Radec · 23 Oct 2015 at 18:00

Does your hdd led cable split off to a reset?

xxtomox · 23 Oct 2015 at 18:02

it does indeed. kinda stuck together

xxtomox · 23 Oct 2015 at 18:02

moulded together

Radec · 23 Oct 2015 at 18:04

That is meant to indicate H.D.D LED & Power SW. But I/m guessing they labelled it wrong. That reset with the h.d.d led is indeed the power cable.

xxtomox · 23 Oct 2015 at 18:07

How did you work that out?
but I'm still missing yhr power LED + and - Cable

Radec · 23 Oct 2015 at 18:10

Because I have the same case. I just opened up mine and had a look. The hdd is attached to the power.

Tried to find the LED - and + too, but couldn't find those, it's only from what I read in the manual.

xxtomox · 23 Oct 2015 at 18:13

Manual must be wrong. As it said I should have LED + and -
appreciate all help