Phanteks Primo - first custom loop

Jonahun · 7 Jun 2015 at 21:13

Heya,

i'm looking to build my first custom loop and I would like to ask your help.

I have a Phanteks Enthoo Primo Gold/Black new case (thanks OCUK, arrived yesterday

) and the plan is a Gold/Black theme.

The mainboard is ASrock OC Formula Z97, colors okey, the CPU is a 4790K OC up to 4.8GHz.

The VGA will be a 980Ti or a Fiji, so this caliber. For reservoir a big tube next right to the MB, 240mm.

Radiators for the up and the bottom, 1-1 420mm long 60mm thick. Fittings some compression.

Could you advise me builds?

Thanks!

Glanza · 7 Jun 2015 at 22:03

Dual or single loop?

Jonahun · 7 Jun 2015 at 23:01

Heya,

single loop, also have a fan controller to control the temp, Alpenfohn Alpine touch.

Thanks!

Jonahun · 12 Jun 2015 at 10:05

no ideas for a build?

Glanza · 12 Jun 2015 at 12:42

This is very similar to what I run in my Enthoo Primo. Granted I have a Monsta 360mm in the bottom but OCUK don't stock that rad and you'll need to decide on fans, I run pull on the top 480mm and push / pull on the Monsta. Also adjust the amount of barbs for what you will require. Though if your wanting gold Bitspower probably the way to go.

Anyway something to get you started, granted it comes in more then I paid.

YOUR BASKET
1 x EK Water Blocks EK-XTOP Dual D5 PWM (incl. 2x pump) £139.99
1 x XSPC RayStorm CPU WaterBlock (Intel) Copper £104.99
1 x EK Water Blocks EK-CoolStream XE 480 (Quad) £99.95
1 x Coolgate G2 Radiator 10 FPI - 360mm £67.99
1 x XSPC Photon 270 Tube Reservoir £46.99
2 x XSPC HighFlex Hose 7/16" ID, 5/8" OD, 15.9/11.1mm, 2m, Black £5.99 (£11.98)
6 x XSPC G1/4" 90° Rotary Fitting (Black Chrome) £4.49 (£26.94)
6 x XSPC G1/4" 45° Rotary Fitting (Black Chrome) £4.49 (£26.94)
10 x XSPC G1/4" to 7/16" ID, 5/8" OD Compression Fitting (Black Chrome) £3.49 (£34.90)
Total : £570.26 (includes shipping : £8.00 Ex.VAT).