Please Check my Overclocking settings (MvG board)

Jay85

Jay85

Jay85

Soldato
Joined
22 May 2010
Posts
12,956
Location
Minibotpc
Hi fellow Guru's!


Managed to have a play around with the settings tonight and so far settling on 4.4ghz on these settings.


I want to push harder though so what do you recommend i change to enable me to achieve a 4.7ghz marker? (8Pack you help would be much appreciated here)


Here are my current settings:


121107003643.png

121107003636.png

121107003600.png

121107003531.png

121107003459.png





I'm on 1.28volts at the moment according to cpu-z but have yet to prime95 this setting... will let you know. Also XMP is enabled.


Ultimate goal is to achieve around 4.7ghz if possible.
 
When i started prime95 i noticed a massive vdrop from 1.28v to 1.232 volts! Do i need to set my LLC higher? Also i don't see an option for offset to offset the voltage higher to compensate for this.. (i think that's what it does lol)
 
Managing 4.7ghz at 1.37v with a high LLC.. have yet to test if its prime stable.. but my concern is i've seen people who have overclocked to 5ghz on this voltage.


Is there something i'm missing here?

CPU-Z.jpg
 
Prime95 for about 15 mins... Stable so far (im a non believer for priming for hours, dont see the point unless im doing some serious intensive cpu work for hours on end)


Prime95.jpg




Just wondering now if i can fine tune this to lower the temps abit and to lower the voltage maybe as well..
 
I've been playing around with the cpu pll voltage and noticed that by decreasing this value below 1.8v to say 1.75v i can lower my cpu temps abit. However i am still having to use around 1.368v according to cpu-z and ultra high 75% LLC!

My idles around 43c... Is there any way at all to lower my temps further?



P.S im doing this using manual voltage control rather than intel turbo multiplier or offset (no idea how offset works)
 
You must log in or register to reply here.
Back
Top Bottom