Please could I have some advice? GPU temps

SE77EN · 13 Apr 2020 at 09:59

Hi all, newbie to the forum and to PC building. Just built a new PC in small MATX case and everything went OK and all temps except GPU are fine. At full load my Gigabyte 1080 ti OC (3 fan) is reaching temps of 85c and from what I read it’s no major concern but the fans get really loud. The GPU is large and the case is small, it doesn’t have much room to breathe. I use an AIO for the CPU and I have tried multiple fans at different locations around the case and changed them from intake/exhaust and it all makes no difference. I have put fresh thermal paste on the GPU too but nothing changed. In my old case the same GPU was getting in the low 70’s overclocked and now it’s running at stock. I’m wondering if putting a fan or 2 underneath the GPU to blow more air through would help with exhaust fans at the top? The issue with that is although there are screw holes for bottom fans, it would place the directly on the shroud and above PSU, which is bottom facing but I’m wondering where the bottom fans would get air from. I can’t place my AIO at the top of the case because of RAM/CPU header clearance. Any help would be appreciated and full specs below:

Case: CiT Seven case
MOBO: MSI B450M VDH Pro Max
CPU: Ryzen 5 3600
CPU Cooler: Corsair H55 AIO 120MM radiator
GPU: Gigabyte 1080 ti OC 11gb
PSU: Corsair CX750
RAM: Corsair Vengeance 16gb (2x8gb) 3200mhz.

SE77EN · 13 Apr 2020 at 10:29

Thank you for the advice. I’ve actually got 2 P12 fans coming today from Amazon. I currently have my radiator at the front with the fan on the back of it taking air in. Would I be better putting the 2 new P12 fans on the front and put the radiator at the back as an exhaust? I can afford a bit more heat on the CPU because I currently have about 35c idle and around 60c under load. So if I have the 2 from P12 fans, then rear exhaust with radiator and 2 exhaust fans on the top? Thank you again for the reply.

SE77EN · 13 Apr 2020 at 11:03

Ok well I will try both P12 fans at the front, I’ll mount the radiator at the back with the rear exhaust fan over it. I have another F12 fan which I’ll mount at the top too and see how that goes. I’m just trying to find a way to keep the air moving but all this negative and positive pressure isn’t helping so hopefully these new fans will do the job. Once again, I really appreciate the advice.

SE77EN · 13 Apr 2020 at 13:34

Thanks very much guys. I’ll be trying all of the above as soon as the these fans arrive. Thanks again!

SE77EN · 13 Apr 2020 at 20:14

Well the 2 front fans, 2 upper exhaust fans and the rear exhaust/radiator setup seems to have helped. Removed 2 PCI slots and now 1080ti is at 75c under full load. Can hardly hear the fans from the GPU so thank you all very much for your help. Now onto custom fan curves to stop it all revving up when I open Chrome or something haha!

SE77EN · 14 Apr 2020 at 09:55

Ah so has the fan at the bottom of the case made a difference? My new case is so small but I do think that I could fit another fan at the bottom, there certainly is the holes for it. I’m just conscious of where it will be getting air from considering it will be right on top of the PSU. My old case was huge and the GPU never had heating issues, even when overclocking so I’m definitely putting it down to the new case.