PLS help to check W/C spec

[wei]

a long time watcher here, and newbie to watercooling...

finally want to go for watercooling, planning to buy this setup before holiday

Swiftech GTZ cpu block 1/2" barb
Swiftech MCR320QPK 1/2" barb
XSPC DDC 18w Ultra Pump/Reservoir 1/2" barb
XSPC 7/16" ID - 5/8" OD Clear tubing
Nylon Hose Clamp for 1/2" Tubing
Feser One Ultra Pure Water 1L

Am I missing anything?
for now, I just want to cool cpu which is E8400 E0. aim to get 4.5g at decent temp. is this setup overkilled just for cpu? maybe I will add vga block soon.(ATI4850) if I add vga block in this loop, will the mcr320 handle it or I'd better to get a more powerful rad now?
one more question, what the order should be?

thanks guys


Wei

 

[Cob]

It's grand for a CPU-only loop. And the MCR320 will be grand if you ass a GPU to the loop.

The only think you're missinf are fans, tho you are probably aware of that anyway.

 

[wei]

thanks for your input, Cob. I think im going to place the order soon...

btw, sorry about my english

 

[SinaiSound]

Ditch the Swiftech radiator and get a Thermochill PA120.3. You will be able to run fans slower using this rad and get similar temps to the swiftech

You won't need hose clamps if you are using 7/16 tubing. Had to use a knife to get maskerkleer tubing off my 1/2 barbs

Don't use the feser water, a waste of money. Use distilled / deionised water with a little Pentosin G11 and maybe some PT Nuke

 

[Bradley8988]

Ditch the Swiftech radiator and get a Thermochill PA120.3. You will be able to run fans slower using this rad and get similar temps to the swiftech

You won't need hose clamps if you are using 7/16 tubing. Had to use a knife to get maskerkleer tubing off my 1/2 barbs

Don't use the feser water, a waste of money. Use distilled / deionised water with a little Pentosin G11 and maybe some PT Nuke

+1