Possible Psu Problem

Idleman · 31 Jul 2013 at 02:02

honosuseri said:
Get that sig updated too

It is, almost.

wazza300 · 31 Jul 2013 at 02:03

You need to use CPU voltage offset,and the right loadline calibration setting

Idk how your clocked atm,fixed or offset

But if it uses more voltage than you want/need then use less offset

Idleman · 31 Jul 2013 at 02:18

wazza300 said:
You need to use CPU voltage offset,and the right loadline calibration setting

Idk how your clocked atm,fixed or offset

But if it uses more voltage than you want/need then use less offset

I think it is on Auto atm. I`ll have a go at lowering it tomorrow. Right, that`s me done, I`m off to bed, will update later tomorrow. And thanks again, guys.

wazza300 · 31 Jul 2013 at 12:18

you can try maybe high llc and +0.020 cpu offset and see what the load cpu voltage is in cpu-z while stressed,then adjust the offset to suit

setter · 31 Jul 2013 at 21:59

Glad to see that you got it sorted mate, look forward to seeing your clocking results.

Idleman · 1 Aug 2013 at 01:40

setter said:
Glad to see that you got it sorted mate, look forward to seeing your clocking results.

Cheers buddy, it was a bit of relief to say the least.

Did`nt get a chance to do anything yesterday, but hopefully will be able to get stuck in at the weekend.
But I will continue this in the other thread. I just want to get the Vcore down as low as possible. Also, hot happy with the ram voltages, I have it set at 1.65v but it runs at about 1.663v, which it`s never done before.

Idleman · 1 Aug 2013 at 11:59

Updating the thread here: http://forums.overclockers.co.uk/showthread.php?t=18527667&page=2

Idleman · 12 Aug 2013 at 19:09

Managed to sort out the Skt 775 mobo and Cpu issue. Tried it with an E5200 and it worked first time. So now have the Q6600 up and running. But I need to get a Psu with an 8 pin Cpu connector, before I can OC it, but not in any hurry.