Power supply needed 16 sata drives.

[GDL]

Hi guys.
I have a HP ML10 V2 server that uses a none modular stock PSU and I'm daisy chaining molex to sata power extenders/spliters to fit more drives since it's used as a file server.

I'm going to be moving it out of the case it sits in next week but I'm after a PSU that I can have at least 16 full size hard drives powered using actual power cables.

Anyone know of a modular power PSU that I can purchase more sata power cables without using splitters?

Cheers.

It runs 24/7 has 32Gb ram and a Xeon E3-1241V3 so it needs to have some grunt to it.

 

[GDL]

It does have a proprietary connector but that is just to power the drive back plate which I'm not using, I've found a pin diagram to recreate it if\when I replace the PSU.

https://superuser.com/questions/972899/can-i-replace-my-4u-server-psu-with-a-desktop-psu

Currently the draw is 93.6w just copying some data about with 2.38kWh daily average rate from the 350w PSU.

I'll use more spliters

Cheers gents.

 

[GDL]

Sounds like lower speed/5400rpm NAS drives.

Yup. ATM
2x SSD
4x WD 2TB Green
6x WD 3TB Red
2x WD 6TB Red

Looking to get another two of the 6TB's shortly migrate the data off the greens to them and then get more 6TB Reds.