Prime 95 help

[Davy644]

Hi can anybody tell me were to find the stress text file in prime95,message reads,
(FATAL ERROR rounding was 0.5 expected less than 0.4,Hardwear Failure detected,consult STRESS TEXT FILE,Torture Test ran for 3 minutes 1 Error 0 warnings,work thread 1 and 4 stopped)
Tell me how do I get to this stress text file, does this sound familiar to you guys, thanks ..Davy

 

[Davy644]

Am currantly running @ 350 fside Bus,Vcore 1.256 only adjusted the FSB left the rest on auto,thanks regards davy
Temps 45 44 39 38,as soon as i find how to post my results i would like to get more involved

 

[Davy644]

My first guesses are that the core looks a little low for over 3GHz, you might find that if you want to go further then you have to up it slightly.

Have you manually set the ram voltage and timings?

Apart from the FSB have left everything on auto,and can only get to 346=3100 on latest prime
then it starts to get unstable,
I then started to up the vcore in small steps by following are overclockers guide to a point were i stopped @ 367fsb=3303 vcore1.38 to 1.40000 as this started to have no or very little effect raising my clock speed forgot to mention my Dram frequency changed from a ratio of 1.1to 5.6 all at 2T then back again,so i gather the board P5E its doing its job and overclocking my ram speed which was also left on Auto, so to summarize i have only tinkered with the FSB clock and raised the Core to a point were its having very little effect,am now sitting @3.303,
By the way i havent changed the Bios update as i beleive we are having with this board so still have the factory setting Bios 107
cheers and thanks again

 

[Davy644]

Agr3sive thanks for input mate,will have to have another bash later,I was under the impression my auto settings was giving it enough