PRIMOCHILL

Shawy · 19 Jun 2013 at 22:15

I had to swap some tubing out today so I thought I'd share a pic of some 2 week old tubing which has had EKoolant inside vs some brand new tubing. I'll upload a pic with filled tube tomorrow.

OLDPHART · 19 Jun 2013 at 22:57

Jay85 said:
Sweet will get this to replace my tubing this year .

My xspc tubing is holding up great and no clouding so far either.

Hi, l had xspc blue tubing replaced it after 2 year's with EC6 coolant which was as clear as the day l filled the loop.

fantasticCG · 19 Jun 2013 at 23:05

rjkoneill said:
primochill has no plasticizer. if you can make it cloud up, your coolant/system cleaning is to blame.

Are you getting there acrylic range of tubing in that I've seen?

rjk · 19 Jun 2013 at 23:14

hopefully

tipes · 20 Jun 2013 at 09:37

rjkoneill said:
hopefully

Nice - more money to spend, groan.

Mark

Evil-I · 21 Jun 2013 at 09:52

rjkoneill said:
hopefully

I really hope so :-)

I looked at crystal link for my new loop, but stock levels everywhere of the fittings are abysmal. I've basically given up on it. Are bitspower fittings really difficult to get stock for?

If the primochill rigid tube and compression fittings work as well as I hope, I imagine it will be VERY popular.

E-I

gatecrasherlok · 23 Jun 2013 at 03:02

Hopefully when you get the 1/2 - 3/4 acrylic tubing in I will definately buy. One question though what fittings are available to use for this tube as crystal link would be too small.

tipes · 23 Jun 2013 at 07:02

gatecrasherlok said:
Hopefully when you get the 1/2 - 3/4 acrylic tubing in I will definately buy. One question though what fittings are available to use for this tube as crystal link would be too small.

Think you would need to use the Primochill compression fittings made to go with the new tubing. Still they will be offering them in quite a few colours I believe - have a look on the primochill site, as they have info/pics etc.

Mark

gatecrasherlok · 23 Jun 2013 at 18:11

Just had a look through their website. i was able to find the acrylic tubing but did not anything about the crystal link type fittings or compressions.

Anybody able to link me to one please

tipes · 23 Jun 2013 at 20:00

gatecrasherlok said:
Just had a look through their website. i was able to find the acrylic tubing but did not anything about the crystal link type fittings or compressions.

Anybody able to link me to one please

Hi,

Just went to Primochill site and it is not working - just updated their site as well!!! Then I found this

http://forums.pureoverclock.com/pri...fittings-knurled-grip-4-packs.html#post159376

At least it gives you an idea. Have a look on primochill Facebook page - as there are pics and info about the compression fittings for the tubing.

Mark

rjk · 23 Jun 2013 at 21:33

Evil-I said:
Are bitspower fittings really difficult to get stock for?

yes, very much so.

gatecrasherlok · 23 Jun 2013 at 21:46

tipes said:
Hi,

Just went to Primochill site and it is not working - just updated their site as well!!! Then I found this

http://forums.pureoverclock.com/pri...fittings-knurled-grip-4-packs.html#post159376

At least it gives you an idea. Have a look on primochill Facebook page - as there are pics and info about the compression fittings for the tubing.

Mark

Not bad, very nice indeed. I'll see if I can trawl out any more pics or info about this. Unfortunately I dont have facebook, or should I say I chose not to ha ha.

Anyways thanks for the link

tipes · 23 Jun 2013 at 22:29

gatecrasherlok said:
Not bad, very nice indeed. I'll see if I can trawl out any more pics or info about this. Unfortunately I dont have facebook, or should I say I chose not to ha ha.

Anyways thanks for the link

You're welcome

Mark

Ps Looking forward to re doing my system with this tubing.

** PRIMOCHILL **

PRIMOCHILL