Problems Overclocking a 4400 X2

[JhaDur]

Could some kind person let me know the BIOS settings I need for overclocking my setup.

It's a 4400X2 Processor CCB2E stepping
Asus A8N32-SLI Deluxe mobo
1Gb Ballistix PC4000 memory


I was playing earlier and just put the FSB up to 210Mhz and it worked fine and Primed with no problems. Upped it to 220Mhz and changed the SB to NB Frequency (which I presume is the Hypertransport Frequency) to 4x and it won't even get into Windows. I set the memory to stay on 200Mhz still no good

I havent tried upping the voltages yet but I didn't think it would need extra voltage that soon.

Any help would be greatly appreciated

Thanks in advance

Mic

 

[Rab]

u should really go over the sticky on Oc ing, read it again & again until u r familar with it.

little help thou for u u can try.

u said problems where starting @ 210?

put back to 210
put u htt @ 3x
put memory on a 180 or 166 divider, that should get it going @ 210 np.

if works, raise fsb in 5-10 @ a time, check 2 see if boots ok & can pass super pi 8mb run.

when u hit a stumbling block, raise voltage for u cpu, then try again c if stable.
but as said above, read the oc sticky, aint hard good luck