Project ANNIHILATOR

Associate
Joined
2 Jan 2009
Posts
452
Hi again, just thought id show you some updated pics of my new build and i will keep you posted as i get on with it.

Computerpics001-2.jpg



Computerpics002-2.jpg



Computerpics003-2.jpg



Computerpics004-2.jpg



Computerpics006-2.jpg



Computerpics007-1.jpg



Computerpics009.jpg



Computerpics010.jpg



Weddingandcomputerpics215.jpg
 
Ive put this down as a new thread as this is the start of my project now and i have a name for it so thought id start here and keep going in this thread.
 
The circuit board is for the silverstone case power and reset. I am using the laing controller for the pumps which connects to the aquaero i am using.
 
Hi again guys, just a quicky what would you say is the best kind of paint for painting my rads? Also My aquaero i have for this project, how many fans would you say it could handle on each channel. On my current pc i have 2, do you think it could manage 3?
 
Its all new apart from the cpu, motherboard and chipset blocks. The reason being i sent my motherboard off, an old 780i Abit and they couldnt supply a new one so the company gave me a 780i Asus in the end. Thats why i got universal blocks and they are really good. Once i get enough cash though i will be going i7. For now though my new case is all modded ready and getting powder coated and i have all the cooling loops fitted ready for my classified. Im on my other system at the minute if youve seen that build in the cases section with my triple rad loop and evga 790i ddr3 board.
 
Hi guys, just a quick update of some of my powder coated parts i have back. The Candy blue has arrived from the US and is being done this week i will keep you updated.

TJ071.jpg


TJ072.jpg


TJ073.jpg


TJ074.jpg


TJ075.jpg
 
Hi guys, yeah the powder has come from the us and i have just had it done round the corner from where i live. The blue should hopefully be getting done this week and should have pics by the weekend hopefully.
 
Hi Guys well heres an update for you. I have my case back and it looks amazing, been on all day building it up. The blue is like a pearl effect but it doesnt show very well in the pics, when the sun shines on it, it looks awesome!

P1010029.jpg


P1010030.jpg


P1010030.jpg


P1010032.jpg


P1010037.jpg


P1010038.jpg


P1010039.jpg


P1010040.jpg


P1010042.jpg


P1010043.jpg
 
Well guys heres a bit more of an update. I have spliced and braide and tested all the fans now and they work spot on! I think i am now going to mount the motherboard and plod on from there hopefully with no snags.

P1010044.jpg


P1010045.jpg


P1010046.jpg


P1010047.jpg


P1010048.jpg


P1010049.jpg



P1010051.jpg
 
Hi, yes they are both sizes of the enermax cluster, a cracking fan nice looking and performs very well moves a lot of air and is quiet. heres some update pics aswell.

P1010063-1-1.jpg


P1010059.jpg


P1010060.jpg


P1010061.jpg


P1010062.jpg
 
Hi again, yes you can turn the lights on and off whichever you choose there is a button on each fan. I have now ordered all the bitspower compression fittings so now the waiting for delivery before i can do anything!! gutted could take a couple of weeks from the states. Bitspower is however sponsoring my build so i have got a cracking deal from them.
 
Well heres a bit more of an update, it is nearly finished and am on it as i type! I am currentley sat at 4.2ghz on 36 degrees on the cpu and gpu is 38 after a good few hours gaming. These bitspower fittings are excellent.


ComputerPics083.jpg


ComputerPics084.jpg


ComputerPics085.jpg


ComputerPics086.jpg


ComputerPics088.jpg


ComputerPics089.jpg
 
Hi guys, thanks a lot for all your comments much appreciated. Im currentley seeing how far i can push the system and it is great. I have it at 4.050ghz and under prime its hitting 45-48 which i dont think is bad at all and the GPUs are at 750,1550,1350 on EVGA precision and runs at 44-49 on full load. Just recieved my new 1tb spinpoint and 2 sony DRU 870 from ocuk once again excellent delivery. Busy all weekend though so dunno if ill have time to fit them.
 
Thanks for the constructive comments guys and its appreciated. I am still waiting on my HDD Caddy so i can finish the overall build before there is any more progress on the case. Once i get this it will all be complete and i will be altering tubing routes etc , i did try the way you said bradley however the tubing was kinking easy and i didnt want to put coils on so was a bit stuck with the routing. I used 2 different GPU blocks as i already had one 280 with a danger den block and another 280 air cooled so just purchased a EK block for £50 as couldnt justify £100 which is obviously double to get another danger den block. The main tube i couldnt get as i wanted it which altered everything was the one from the northbridge to the top GPU every way i tried it would create a slight ovelness in the tubing which i didnt want.
 
Last edited:
Back
Top Bottom