Project: LARP

Freelanc3r

Freelanc3r

Freelanc3r

Associate
Joined
10 Dec 2005
Posts
1,540
PICS IN POST #15 AND #48

OH HEY GUYS,

Decided to jump into i7 and finally put my PC under water. Also switching from ATI to Nvidia. I guess I just caught the unrelenting upgrade-bug from working in tech at OcUK :p

Old PC Specs:

q9650 @ 3.6ghz (Titan Fenrir)
Asus Rampage Formula
4GB (2x2gb) Xms2 800mhz
Sapphire 4870x2
Corsair TX650w
Samsung Spinpoint 320gb (Windows install and storage)
Antec 902, 3 Red akasa fans

My old antec was totally neglected and instead of cleaning up and re-cable managing my PC I decided I really did need to upgrade anyway. And I just waded in.

Current Spec:
EK Supreme LT Nickel Plexi - i7 970 @ 4ghz, 1.328v :D
Gigabyte X58-USB3. Budget board but overclocks just the same as the UD5 :D
6GB (3x2gb) Corsair Dominator @ 1600mhz
Zotac 460 /w Nickel Acetal EK waterblock @ 900core clock, 1087 core voltage, 1800 Shader Clock
Samsung Spinpoint f1 1TB (storage)
Crucial 64GB SSD (windows install)
Black Ice SR1 360 rad /w 3x120mm Xigmatek Crystals (Red LED) All running on fan voltage reducer cables
Corsair Professional Series AX750w (Braiding is extremely nice, althought I have PCI-E and 24pin nzxt pre braided extensions now)
XSPC 750ml Bay/res
3/8" Masterkleeer Clear tubing
Fluid XP+ Eco Earth Clear (With added candy red Mayhem dye)
CoolerMaster HAF X

Just got home from work with my fresh new build. Many thanks to rjkoneill and NathWraith for helping me with the spec/build.

Will post pics and update the thread in a lot more detail soon ;) Just thought I'd tease you all haha! Will also post temps whilst stress testing etc etc.

Really pleased with the final outcome and I hope you guys will be too, it's sleek.
 
Last edited:
i have to say, before the pics go live

normally, i dislike cases liek the HAF, but it cant be agued what a neat job Freelanc3r did of his build.

the tubing routing looks fantastic and the hardware choices are just right.
 
Havn't got many pics of it in progress, I was too eager to build it first. But hopefully these will satisfy you all!

First of all, EK Supreme LT Nickel Plexi mounted on the board. My first time fitting a CPU block and was extremely straight forward. Using all TFC 3/8 compression fittings.
IMG_1402.jpg



Bayres mounted and all tubing fitted, using all 3/8 TFC compression fittings, they really impressed me with the finish. Me and Rjkoneil cherry picked them out the warehouse to make sure we got the newer ones. Not quite sure of the difference, as they are the same fitting. I do plan to get a black backplate for my gtx460, personally I think it'd complete the look of the build. Just waiting for OcUK to get them in stock :)
IMG_1403.jpg



Cheeky shot of the SR1, with 3 xigmatek crystals mounted in a pull config. I could still fit the standard HAF X 200m fans, but there's really not much point.
IMG_1408.jpg


Another Motherboard shot, that's all I seem to have haha! I heatgunned the stickers off the xigma fans. Yeah it doesn't look that pretty but the standard stickers don't either :D
IMG_1409.jpg


Apologies for the unexciting pictures. The front panel headers are coming through a cable management hole in the PSU cable box, was pretty nifty imo.
IMG_1411.jpg


Again, I was really pleased with my cable management, the HAF did make it rather easy though. Especially with the fully Modular AX750 :D
IMG_1412.jpg


I think the PSU cable box really finishes it off. Makes the case look a lot tidier. Sometime soon I do plan to change the fluid to red, but still keeping clear tubing, and possibly add a Red LED Light strip.
IMG_1401.jpg


Not quite sure why Coolermaster put an unvevent amount of watercooling gromets. Think one of them is for the USB 3.0 extension cables for the front panel, however I removed them. Try and spot the 'edited' bit of case before the next photo ;)
IMG_1413.jpg


Custom IO shield 'edited' courtesy of Rjkoneil. The x58-usb3.0 board didn't come with a back plate so I got a spare UDR3 backplate, and Rjk did his best to make it fit with the dremel. I've just gotta be careful when plugging my network cable in, totally cuts up your fingers :p Adds a ghetto effect to the rugged HAF theme haha!
IMG_1405.jpg


Completely rushed photo, camera was focused on my over enthusiastic thumbs up. I admit the cable management at the back isn't the best. As I did have to use an 8pin extension cable. But you can't really see that which is good.
IMG_1407.jpg


I removed the stock shroud that comes attached with the 200mm fan on the sidepanel, but I do have the fan on. It's running at like 340RPM or something ridiculous according to the bios, and it's deathly silent. The massive sidefan does kind of ruin the sidepanel, but the window is still quite decent and saves me having to custom Mod one.
IMG_1415.jpg


Like I say, I do plan to change fluid sometime soon. Will make it look a lot better imo. That reminds me, I need to top the res up a little bit more too. Sorry about my messy desk in the background of these photos btw!
IMG_1406.jpg


My Setup at home, another rushed photo as I've been itching to show you guys this build. The case really is the right size for my room/desk. Accompanied by my 24'' monitor, saitek eclipse 2 and razer deathadder (mouse of champions) I keep toying with the idea of gtx460 SLI and dual monitors in the distant future :D
IMG_1431.jpg



Hope you guys enjoy these photos, I know they aren't the best. Will take some of the PC in the dark with the sidepanel off, should be very pretty :) I'm gonna post some screenshots of some temps and a few bench's for you lot later. I also have an 'Overclockers dream' according to Rjk in my room. A thermostat that tells me the room temperature. Again many thanks to NathWraith and Rjkoneil for the help with this.

Let me know what you guys think! and any suggestions for cable management or anything is appreciated :)
 
Last edited:
Finally! Looks sweeeeeeeeet!

Should have got me to do the cable management on the back ;)

Proper sleek build man :D

[EDIT] Noticed rjk decided to copy my SLEEK html skills.
 
You must log in or register to reply here.
Back
Top Bottom