Project: Parvum

BCMods · 11 Feb 2013 at 23:05

I figured that as this is a completely different build to my main rig (a few components will be reused), it needed a new thread.

Specs:
CPU - Intel i5 3570k
Motherboard - Gigabyte G1.Sniper M3
RAM - 16GB Corsair Vengeance Black 1600MHz (4x 4GB)
GPU - AMD Radeon 7950 3GB
SSD - 120GB OCZ Vertex 3
HDD - 1TB Western Digital Caviar Black
Case - Parvum Systems S1.0 Black (With green accents)
Fans - 4x Noctua NF-F12 (120mm)
PSU - OCZ ZS 750w

Watercooling hardware:
EK-Supremacy (Clean Nickel Plexi)
EK-FC7950 EN (Nickel Plexi)
EK-FC7970 Backplate - Black
EK-VGA I/O bracket HD7970
Swiftech MCRES V2
Bitspower 250mm Z-Multi - Clear
Laing D5 with EK D5 X-Top
2x Alphacool NexXxoS ST30 240mm
Primochill Primoflex Advanced LRT Clear 3/8 ID - 5/8 OD
Deionized Water
Mayhems X1 - UV Green Concentrate
Various Compression Fittings

Other parts:
BCMods Green/Black Paracord Sleeved Cables - 24 Pin Motherboard, 4 Pin CPU, 2x 6 Pin GPU, 3 Pin Fans
2x BCMods 30CM Ultra-Bright LED Strip (White)

BCMods on Facebook

Parvum Systems on Facebook

Case will look like this:

My current rig:

DaleTheWhale · 11 Feb 2013 at 23:31

This looks very interesting, been a while since I've seen a nice green and black case!

BuZ · 12 Feb 2013 at 01:39

Looking great

Anox · 12 Feb 2013 at 18:14

Interesting build for sure!

BCMods · 12 Feb 2013 at 22:33

Cheers guys!

Received the CPU and motherboard today

Just ordered my GPU for delivery tomorrow so i'll get some photos of it up once i get it installed

hardkore · 14 Feb 2013 at 16:21

So damn temped to go mATX. Looks great

BCMods · 17 Feb 2013 at 19:41

Thanks

New GPU!

Watercooling goodness

*Rich* · 18 Feb 2013 at 20:54

Some good gear in there, Motherboard too, i have the e-atx sniper 3 board.

Anox · 18 Feb 2013 at 21:12

Nice build here.

coolamasta · 19 Feb 2013 at 10:23

Awesome little case that, you going to use internal lighting?

BCMods · 19 Feb 2013 at 17:40

Cheers

I was planning on using a quad UV cathode kit but in my old build I used a Hue and had it set to white and it made everything look really nice so i'm quite tempted to go with some white LED strips again.

Thoughts?

wobbledog · 20 Feb 2013 at 15:56

some green BitFenix Alchemy strips would look pretty good in the system

BCMods · 20 Feb 2013 at 16:35

Having green LEDs would make everything look too green, imo.

wobbledog · 20 Feb 2013 at 17:09

BCMods said:
Having green LEDs would make everything look too green, imo.

or maybe some white then?

BCMods · 20 Feb 2013 at 20:59

wobbledog said:
or maybe some white then?

Think i'll end up doing that

Any you'd specifically recommend?

wobbledog · 21 Feb 2013 at 00:12

not too sure since I've never used lighting before, but I'm planning to buy BitFenix Alchemy's (which ever size suits you), I've read they're pretty good. You could also look at the NZXT ones, but whatever you prefer

TwsT · 21 Feb 2013 at 16:37

i#m doing the same ha but bit skint atm so i'm pushing it back.

BCMods · 25 Feb 2013 at 21:23

White LED strips it is

I may have just ordered 3 of these

ivorito · 25 Feb 2013 at 23:23

Looks like its going to be a nice build

BCMods · 1 Mar 2013 at 15:08