• Notice regarding image hosts and attachments. See here.

PSU for ITX system.

Associate
Joined
20 Nov 2009
Posts
2,050
Location
Haarby, DENMARK
My ITX all round system is nearing it's final phase, and I'm just looking for a good effective and silent PSU that has a few resources to handle future upgrades.
I've purchases all the pieces within the last 3½ months when I could afford it, and here's what I have ended up with.

Cooler Master Elite 120 Advanced case
ASRock B75M-ITX Intel Core i5 3570 Ivy Bridge (Non-K model)
Xigmatek Praeton LD963 CPU cooler
Crucial BallistiX Tactical 8GB DDR3 1600MHz CL8 (2x4)
eVGA GeForce GTX 660 FTW 2GB (For-The-Win edition)
LiteOn iHas 124 DVD-RW
HGST Travelstar Z7K500 HTS725050A7E630 500GB 7200 RPM 32MB Cache 2.5" SATA 6.0Gb/s Internal Notebook Hard Drive
(I chose this small drive for better airflow).

What PSU would be sensible to mount into this system ?. I thinking of at least 550watt PSU ? There's no intention of overclocking, but I would like to throw a GTX 680 4GB into the system some time later.
I would prefer a semi-modular/modular PSU because the space is tight/limited.
 
Last edited:
Well i run one of these and i think its excellent! http://www.overclockers.co.uk/showproduct.php?prodid=CA-166-CM

I thought about a similar setup to what your doing what now please post a build log and your thoughts on the case :) Also have you bought the case yet?

EDIT: Noticed its out of stock damnit, If u can find one cheap enough or a corsair hx/tx then get one :) The case fits full size ATX Psu's due to its shelf design
This http://www.overclockers.co.uk/showproduct.php?prodid=CA-052-CS&groupid=701&catid=123&subcat=1084 but again its out of stock :/
 
Last edited:
Well i run one of these and i think its excellent! http://www.overclockers.co.uk/showproduct.php?prodid=CA-166-CM

I thought about a similar setup to what your doing what now please post a build log and your thoughts on the case :) Also have you bought the case yet?

EDIT: Noticed its out of stock damnit, If u can find one cheap enough or a corsair hx/tx then get one :) The case fits full size ATX Psu's due to its shelf design
This http://www.overclockers.co.uk/showproduct.php?prodid=CA-052-CS&groupid=701&catid=123&subcat=1084 but again its out of stock :/

Thank you for the suggestion ! I have looked at that PSU also (Coolermaster silent pro m600) - I remember having it a Thermaltake Lanbox m-atx build many years ago and it was a super pSU. I also looked at this one with silver 80+ http://www.overclockers.co.uk/showproduct.php?prodid=CA-001-XF&groupid=701&catid=123&subcat=2466 - I know it may be a bit "over-the-top" but should be able to last through many upgrades also.

As for Corsair PSUs I have had my patience tested with them through the years now. For some odd reason one 1 out of 7 Corsair PSU's have been reliable in my system builds, so I try to avoid Corsair when it's about PSU's (I had CX500 = worked perfectly, just need more power for SLi, VX550 = DOA, TX650 = coilwhine after 1year, HX620 = extreme coilwhine from day one when under 0 load, got RMA'ed the same day, TX750 = fan stopped working after 6months, TX850 = was great untill it began getting extremely hot and smelly RMA'ed, HX1000 = coilwhine and fan rattle).

As for build log I will be doing one as soon as my Xigmatek cooler and the PSU to be chose have arrived and I'll take some pictures and post them through the entire build.
I have the case and everything else in hand now except for the cooler and PSU ... so I almost can't wait to get it completed :p
 
Last edited:
Back
Top Bottom