• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Q6600 got to 3.4ghz with 1.35v, whats the average voltage for these chips?

Biomanic

Biomanic

Biomanic

Associate
Joined
25 Jan 2008
Posts
24
Im a happy man to get this far at 3.4ghz, not one single crash or fail boot yet.

Was just wondering what the average voltage was for clocking these, im feeling prety lucky so far at just 1.35v.
 
naudiz said:
THat temperature seems a bit optimistic, check with Coretemp as well

Naud
Click to expand...

Abit Guru shows 28c Coretempp shows 38c, speedfan shows 25c and bios shows 29c.


psychas is that clock for 24/7 usage or for just benching, seems crazy gettin 3.6ghz on air for that vcore?
 
3.6ghz

Right im at 3.6ghz the tempreture has gone up 1c and the vcore is set to 1.4v. CPUID shows vcore at 1.37v

http://valid.x86-secret.com/show_oc.php?id=351273

clock36ghzft6.jpg
 
Last edited:
Nice OC your getting good volts cos u got a processor with a nicer VID 1.2875, it seems the lower the VID the better it OC's, hoping to buy a Q6700 soon, hope i get a VID like that ;)
 
How long does it Prime95 at 3.6 with that Vcore?

I've tried 3.6 with a Vcore 1.480 (CPU-Z) and backed it off. CoreTemp was reading 70,70, 66,66 across all four cores - which I thought was getting a bit high!

Idle temps (Windows / internet browsing etc) are currently at 34, 32, 32, 33. (still at 3.6)

Prime ran for 10min before I manually stopped it as I didn't like how hot it was getting.

I'm using a Tuniq Tower with some AS thermal paste underneath.
 
Dale said:
How long does it Prime95 at 3.6 with that Vcore?

I've tried 3.6 with a Vcore 1.480 (CPU-Z) and backed it off. CoreTemp was reading 70,70, 66,66 across all four cores - which I thought was getting a bit high!

Idle temps (Windows / internet browsing etc) are currently at 34, 32, 32, 33. (still at 3.6)

Prime ran for 10min before I manually stopped it as I didn't like how hot it was getting.

I'm using a Tuniq Tower with some AS thermal paste underneath.
Click to expand...

Priming iv not dont yet as im needing to use my computer for work, but its running all my apps without fault. Im rendering using all 4 threads so my work is very intensive.

My Tower is a TT Mozart TX with 3x 120mm case fans, plus 2x 120mm on my Dual Rad, these are SilenX iXtrema ones.

My CPU block is holding its own here, and is doing a exceptional job. Im using a rare Silverprop Cyclone VE.

newpics124xe7.jpg
 
You must log in or register to reply here.
Back
Top Bottom