Associate
- Joined
- 29 Dec 2010
- Posts
- 33
- Location
- Surrey, England
I've got an H100 and noticed that only one of my fans was turning. I therefore decided to hold down the pumps reset switch; sure enough both the fans fired up...however the one that wasn't turning before, it gradually came to a halt after a little while.
Next I rebooted the pc...no cigar, still only one! I then didn't a cold boot, yay, finally both are going again!
Out of interest I decided to hit the pumps reset switch to find out what would happen; long story short, back to one fan!?
Is it normal that hitting the pumps reset switch should leave me with one spinning fan, and that a reboot is necessary to get both going again?
Next I rebooted the pc...no cigar, still only one! I then didn't a cold boot, yay, finally both are going again!
Out of interest I decided to hit the pumps reset switch to find out what would happen; long story short, back to one fan!?
Is it normal that hitting the pumps reset switch should leave me with one spinning fan, and that a reboot is necessary to get both going again?