• Notice regarding image hosts and attachments. See here.

QUICK QUESTION!

Okay so the HD Audio Cable is plugged in as well as USB 1.

I am now left with the following;

4 Sata Connections

PCI-E 6 PIN CABLE

4 white 4 pin connectors

and a 4 pin connections square shape cable but i believe thats for the motherboard so i think thats a spare

and the cables in talking about that the came with the motherboard are







 
"and a 4 pin connections square shape cable but i believe thats for the motherboard so i think thats a spare - Look in the top left of your motherboard, is there a 4 pin socket? If there is, this connector will probably plug in to this."

I've already plugged that in so ill cross that off

PCI-E 6 PIN CABLE - These will plug in to your graphics card.

Using intergrated graphics so thats a no.

Umm and the SATA drives didn't seem to connect however ill go have another blast!
 
Okay have got power running to both disc drive and harddrive now hurray including being plugged into motherboard

I am now left with the following



2 of these I think they must be for if you want to add more harddrives in the future?
 
Take it slowly and one by one, lets start with wiring the hard drive.
If you look at the hard drive on one side will be a few connections.
first of all there should be two Sata connections, One of these (the bigger one) is Sata power
The smaller one is Sata Data
There may also be a Molex connector (the white 4 pin rectangles), yet this may be covered by a plastic blanker

First of all, we do not need to use the Molex on the hard drive... PERIOD!, unless you do not have any spare Sata power connections left on you're power supply unit.
Take the wider Sata power connector directly from the power supply (using no adaptors) and plug it into the wider Sata power connection that is on the back of the hard drive

now take one of the thinner Sata data cables from a small packet included with either you're motherboard or hard drive, Plug this into the smaller Sata Data into the hard drive, with the other end of this cable plug it into a Sata 6Gbs (if you don't know witch are witch read the motherboard manual) port on the motherboard.
And that's you're hard drive fully wired :) let us know when you've done that

DONE!
 
Nothing happend thats because I don't have the power button or anything like that connected to motherboard because I don't know where each one goes!

So stressed out right now.
 
Okay, so have connected JFP1 AND JFP2 theres a spare one but thats not mentioned in the motherboards manual so not sure whats thats used for.

It says to then plug in; HDD LED & RESET SW.

But I don't seem to be able to find these wires.
 
Altough looking back in the manual it appears a power LED connections goes into JFP2 so does that mean i need to un-wrap the second and slot that into place?
 
Back
Top Bottom