quick temp check

stuie · 14 Apr 2013 at 09:09

Hi guys install my loop a few issues but all good now.

My CPU is running at 4.4 at about 1.19v
My 2 gtx 670 are clocked to 1215 core boost and 7400 mem

With both cards and the CPU folding I'm getting about 70c on the hottest core and GPUs are both running under 50 also I've stuck a couple of probs from my recon controller into the rads and they are about 35c

I'm sure what's all the airs been bled and the as5 has settled it will drop a bit however do those temps seem ok? I was expecting better lol

snips86x · 14 Apr 2013 at 09:37

Have you checked the RADS for dust?

stuie · 14 Apr 2013 at 09:38

They are brand new whole system was only installed yesterday

chris-82 · 14 Apr 2013 at 09:44

1.9v?!!! For 4.4! Sure that's right!

snips86x · 14 Apr 2013 at 09:50

chris-82 said:
1.9v?!!! For 4.4! Sure that's right!

Should be set to auto in the BIOS and should only really sit around the 1.2 mark!

stuie · 14 Apr 2013 at 10:43

my bad 1.19v

stuie · 14 Apr 2013 at 11:39

Temps are dropping slowly didn't realize just how effected water loops are by ambient temps much more so than air opened a top window and average temps have dropped about 5 degrees just with a little breeze through the room. Just priming without the gpu heat 58-62-62-54 max so the gpus are adding about 6 degrees to the cpu temps