RAM DS3P problems

triggerthat · 18 May 2007 at 15:08

Hi guys,

I've got the Balistix 5300 ( 2 x 1GB) along with a E6600 on a DS3P board. What is the idea clock/ratio? I was running 1:1 at 333 but it didn't like running at CAS3. Tried 400 at CAS4 and that didn't like. :S

triggerthat · 18 May 2007 at 17:21

I just left it as default. Should I select 2.2v?

triggerthat · 18 May 2007 at 17:37

I cannot set it to 2.2v in the BIOS. I can only go to + 0.7volts.

Setting it to: 400 at 4-4-4-12 won't allow me to boot. Looking at the gigabye control panel, its seeing it at 1.8v.

triggerthat · 18 May 2007 at 17:43

Cob said:
2.2v is +0.4v in the DS3P's BIOS.

How does that work?

I've also put on the F5 BIOS.

triggerthat · 18 May 2007 at 17:53

Hey,

OK it works at 333 @ 3-3-3-12

Will try 400 @ 4-4-4-12 - that didn't work!

triggerthat · 18 May 2007 at 18:01

400x9

triggerthat · 18 May 2007 at 18:17

OK - well I'd push for 3.6 when I get a better cooler. I've gone for 333 x 9 at 3-3-3-15 which am guessing is what PC5300 is rated for.

triggerthat · 18 May 2007 at 18:51

Hmm - counter strike is not entirely smooth when I run at 2.20 volts and everything else is stock!