Ram problem? (READ DONT MOVE)

Lighters

Lighters

Lighters

Associate
Joined
11 Jun 2006
Posts
1,569
Overclocking amd 4000+ clawhammer

Someone said on my other post:
rounding errors are usually RAM related.. try droping the RAM timmings first before raising vCore, vcore being the 1,500 yes as i havent raised my ram voltage AT ALL! dunno how to overclock ram properly

Type: Small FFTs - stress CPU Min: 8 Max: 64 InPlace: Yes Mem: 8 Time: 15
CPU: 2531MHz FSB: 220MHz [220MHz x 11.5 est.]
18/12/2007 18:04 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 800000 Lucas-Lehmer iterations of M172031 using 8K FFT length.
Test 2, 800000 Lucas-Lehmer iterations of M163839 using 8K FFT length.
FATAL ERROR: Resulting sum was 122279472104932.4, expected: 122279471842793.2
Hardware failure detected, consult stress.txt file.
Torture Test ran 4 minutes 21 seconds - 1 errors, 0 warnings.
Execution halted.

AMD 64 4000+ 220 X 11.5 @ 2532 AT 61C MAX! 1.550 volts, (1,5 standard) (max 1.7)

pc 3200 ram @ 194.8mhz fsb:dram cpu/13 - dunno what that means

Fans on FULL, should i get a processor heatsink and fan so i can overclock more as 2.5 is poor with orthos errors correct?

What does it mean coz 61 is hot isnt it

you sure about dropping the ram timings? what to? i was using standard and had my ram at 400 or 402 it can take around 425/430 if i remember correctly.
3/3/3/8/11/2t/16clocks pc 3200 corsair cmx1024 according to cpu-z
 
Small FFTs stresses the CPU and uses very little memory.

In the Blend test I would say that a rounding error was almost certainly memory since it stresses the memory, but I wouldn't be so sure with the Small FFTs test. And there's no real reason why your memory would fail at those settings providing you are giving it its correct voltage.
 
You must log in or register to reply here.
Back
Top Bottom