Hi i'm beginner at overclocking. I've overclocked my Xeon X5450 for 3.48 GHz Voltage 1.2375V with Asus ROG Commando mobo. I've underclocked RAMs 800 MHz to 772 MHz for stability Voltage 1.8V. Then i've tested the CPU stability with using Prime95 for 2 hours. I've done the test without errors. After the test i was working with Dreamweaver for 3 hours i've got that BSOD 'Memory management' and i've got different BSODs. I'm not sure the BSODs are caused by RAM. It could be caused by CPU.
BIOS Settings:
AI Tuning [Manual]
CPU Frequency [386]
DRAM Frequency [DDR2-772MHz]
PCI Express Frequency [100]
PCI Clock Synchronization [Auto]
Spread Spectrum [Disabled]
CPU VCore Voltage [Auto] (it works at 1.2375 V)
FSB Termination Voltage [Auto]
NB VCore [Auto]
Memory Voltahe [1.800V]
DDRII Cannel A REF Voltage [Auto]
DDRII Cannel B REF Voltage [Auto]
DDRII Controller REF Voltage [Auto]
SB VCore(SATA,PCIE) [Auto]
SB Chipset Voltage [Auto]
Asus C.G.I [Disable]
Static Read Control [Disable]
Configure DRAM Timing by SPD [enable]
CPU Configuration:
CPU Ratio Setting [09.0]
C1E Support [Disabled]
Max CPUID Value Limit [Disabled]
Vanderpool Technology [Disabled]
CPU TM Function [Disabled]
Execute Disable Bit [Enable]
SpeedStep [Disable]
There are my bios settings. Is something wrong on bios settings i'll change it.
System Specs:
Intel Xeon X5450 CPU
Asus ROG Commando P965 Chipset Mobo
AMD FirePro V5800 1GB GDDR5 128 Bit GPU
Kingston (4x2gb) 8GB DDR2 800 MHz CL6 RAM
HDD1: Samsung HD155UI 1.5 TB
HDD2: Samsung HD250HJ 250 GB
HDD3: Samsung SP0411N 40 GB
PSU: Hytech HPS-1560A 280 W
OS: Windows 10 Pro 64-Bit 1809
Sorry for my English.
BIOS Settings:
AI Tuning [Manual]
CPU Frequency [386]
DRAM Frequency [DDR2-772MHz]
PCI Express Frequency [100]
PCI Clock Synchronization [Auto]
Spread Spectrum [Disabled]
CPU VCore Voltage [Auto] (it works at 1.2375 V)
FSB Termination Voltage [Auto]
NB VCore [Auto]
Memory Voltahe [1.800V]
DDRII Cannel A REF Voltage [Auto]
DDRII Cannel B REF Voltage [Auto]
DDRII Controller REF Voltage [Auto]
SB VCore(SATA,PCIE) [Auto]
SB Chipset Voltage [Auto]
Asus C.G.I [Disable]
Static Read Control [Disable]
Configure DRAM Timing by SPD [enable]
CPU Configuration:
CPU Ratio Setting [09.0]
C1E Support [Disabled]
Max CPUID Value Limit [Disabled]
Vanderpool Technology [Disabled]
CPU TM Function [Disabled]
Execute Disable Bit [Enable]
SpeedStep [Disable]
There are my bios settings. Is something wrong on bios settings i'll change it.
System Specs:
Intel Xeon X5450 CPU
Asus ROG Commando P965 Chipset Mobo
AMD FirePro V5800 1GB GDDR5 128 Bit GPU
Kingston (4x2gb) 8GB DDR2 800 MHz CL6 RAM
HDD1: Samsung HD155UI 1.5 TB
HDD2: Samsung HD250HJ 250 GB
HDD3: Samsung SP0411N 40 GB
PSU: Hytech HPS-1560A 280 W
OS: Windows 10 Pro 64-Bit 1809
Sorry for my English.
Last edited: