ram voltage and skylake.

[P4Clock]

i have just got a none k i5 skylake, i am needing some ram around 2666 to 3000mhz so i can pump up the fsb. i have noticed that all ram over 2400Mhz is around 1.35v to 1.4v, stock ram is around 1.2v.

will the higher voltage affect the cpu?

Motherboard in use MSI Z170 M7

 

[mickyflinn]

If you overclcok threw bckl then you will increase the ram speed at the same time so just set the correct timings and voltage for the ram when overclocked.

It wont damage the cpu but will make the entire overclock stable as you are overcloking both the cpu and ram at the same time, Theorecticly.

 

[P4Clock]

If you overclcok threw bckl then you will increase the ram speed at the same time so just set the correct timings and voltage for the ram when overclocked.

It wont damage the cpu but will make the entire overclock stable as you are overcloking both the cpu and ram at the same time, Theorecticly.

RANDOM!

My question is on x99 there was talks about higher voltage memory causing problem's, dose this problem also exhaust with z170

 

[mickyflinn]

RANDOM!

My question is on x99 there was talks about higher voltage memory causing problem's, dose this problem also exhaust with z170

How is my reply random when there is no mention of x99 in your first post.

Random indeed.

 

[8 Pack]

I have tested a lot of SKylake chips.

Several I am regularly using 1.65v plus on mems. All are fine.. For Samsung IC I am using 2v at 4000mhz 12-18-18 so to answer your question 1.35 is totally fine.

 

[P4Clock]

I have tested a lot of SKylake chips.

Several I am regularly using 1.65v plus on mems. All are fine.. For Samsung IC I am using 2v at 4000mhz 12-18-18 so to answer your question 1.35 is totally fine.

thanks.

 

[Jokester]

1.35V is the recommended voltage for DDR3 so yeah it'll be ok.

 

[P4Clock]

1.35V is the recommended voltage for DDR3 so yeah it'll be ok.

the ram slots on my board have 1.2v stamped on them, so thought it better to ask and be safe