Rampage :)

Nickolp1974 · 18 Feb 2013 at 16:00

Doing a bit more tweking, trying to lower timings some more and got an error code 1A, should a little Vdimm bump sort this?? Or help??

Error's are occuring in linX when the load drops and go's onto the next test

Nickolp1974 · 7 Mar 2013 at 13:26

been doing a bit more tweaking hows this looking mate???
stable with IBT/linx/memtest now just need to use to do final checks

cannot touch primary's at all, suppose that is where the cold comes in??

Nickolp1974 · 7 Mar 2013 at 14:22

well its not bf3 stable!!!! screen locked with stuttering sound

Nickolp1974 · 7 Mar 2013 at 23:08

I'm thinking my problem lies with vtt/sa voltages there both at there 1.2 limits, pll still at 1.65v would raising this help??

I was using the bios before the latest one have since updated to the latest, i'll try the above settings again with the new bios.
When it stalled i got a 7F bsod code.

Nickolp1974 · 8 Mar 2013 at 16:24

Just wondered if my ram issue is related to my psu, as it went bang today

Nickolp1974 · 8 Mar 2013 at 22:18

Will find out tomorrow, got a new one on the way, saved the profile so will test again.
On your mini system which you have just done, how do you get your cinebench score above 10, i tried with cpu at nearly at 5.2 and ram at 2.4 with reasonable timings, so whats your secret??

Nickolp1974 · 9 Mar 2013 at 19:11

whyscotty said:
Hope your back up and running ?

You don't expect 8pack to give his trade secrets away

Yeah running ok thx scotty, working ok although when i run firestrike extreme its running 6-700 below my max which is very odd/worrying, will have to investigate further.
And yes i want all the secrets, at this level.

in the cold he can keep a few back

Nickolp1974 · 13 Mar 2013 at 18:08

whats the best way to test for max bclk, do i set vtt/sa to 1.2v and everything else on auto and keep going up???

Nickolp1974 · 19 Mar 2013 at 22:22

Hi bud got a question for you. Since having system back up and running i have been running a moderate oc profile, 4.8 cpu and just under my rams frequency due to the divider, so all in all a breeze. Ran this for 6 days just doing normal stuff, bench/tests/memtest/gaming/etc then one day it just would not boot, bios, nothing, had to clear cmos, any ideas why??

Nickolp1974 · 20 Mar 2013 at 13:43

not sure tbh, also since psu blew, had "bad pool caller", mrs using pc earlier and it bsod on her(too much shopping overload!!!) and that was code 101, so possibly more cpu volts, but it just cant be, either my chips degraded or something fishy is going on.
Think i'm going to re-install bios incase that got corrupted, have already done a windows refresh.
also left eist on the other day and my pc really did not like that, kept stalling until its multiplyer increased, never noticed it that bad before.
so i hate to say this but after bios update i'm gonna run it at stock :mad:

for a bit and see what happens.

Oh and seen some dual channel psc's that are meant to be good for 2400 c8 on air, any good for my board for benching????

thx bud

Nickolp1974 · 20 Mar 2013 at 15:09

ram is these Mushkin 4GB 2x2G #996826 1600MHz 6-8-6-24, what do you think??? will they work ok for benching only??

Do you know if ocuk have any what you would consider decent 3930k batch's at present??

somethings not stable thats the trouble, running quite relaxed, speeds/timings/etc

Nickolp1974 · 20 Mar 2013 at 16:39

do you know what ic's are in these F3-12800CL7Q-16GBZM

Nickolp1974 · 30 Mar 2013 at 17:34

hi bud, you ever used the hotwire feature of the rive with suitable gfx, info is very sparse

Nickolp1974 · 1 Apr 2013 at 12:02

when you say "get the wiring correct" are you talking about the various solder/bridge points on the card??? do i not just plug and go on my matrix plat?

Nickolp1974 · 2 Apr 2013 at 12:07

so would you be able to tell me which points to solder

1. LN2 not needed
2. ADJ MVDD?????
3. ADJ VDDCI???
4. R4E???

Nickolp1974 · 2 Apr 2013 at 12:16

1. disable gpu overvoltage protection
2. reserved for manual memory volt mods
3. res. for man. gpu volt mods
4. Enable VGA hotwire function

Nickolp1974 · 8 Apr 2013 at 23:26

Hey man, will gskill pi's cl6 be any good for my system??

Nickolp1974 · 9 Apr 2013 at 22:51

There in a 6x2gb config, so will 4 of them work in quad channel config?

Nickolp1974 · 10 Apr 2013 at 22:29

Any ideas what an average set on air will do?? Want to know if there worth getting

Nickolp1974 · 10 Apr 2013 at 22:52

Sounds good, is 90 delivered a good price for 6x2gb

Edit:just bought em, so no doubt need a hand when they land!