Re-using Swifttech H20 kit on i7 930

modo77

modo77

modo77

Soldato
Joined
31 Aug 2004
Posts
3,658
Location
Sol System
Hi All,

I've just noticed that my i7 930 has been running a little hot of late (stock fan), its running at 62 idle and 80/90 in games. Prime shoots straight to the high 90's.

I still have my swiftech H20 apex ultra kit, but its not been used since I upgraded from a core2duo.

First question, is there any issue with using these after about 18 months? Would I need to clean (if possible) the rad/pump etc? I drained it and taped the end of the pipes up last year.

Second issue is I can't remember the size of the pipes on this so unsure which waterblocks would be best for it.

Or should I just get the Corsair Hydro H50-1? as that would be a lot less hassle? just seems a bit of a waste since I already have everything apart from the blocks for my latest rig.

Cheers :)
 
I would buy a new cpu block ek supreme hf, replace the tubing and clean out all of the parts then you're good to go.
If you have enough money replace the fans too.
 
Cheers.
Whats the best way to clean out the rad and pump?
Also is the nickel block worth the extra tenner?
Last question is what size tubing does that ek supreme hf use?, worried its different to my current stuff.
 
modo77 said:
Cheers.
Whats the best way to clean out the rad and pump?
Also is the nickel block worth the extra tenner?
Last question is what size tubing does that ek supreme hf use?, worried its different to my current stuff.
Click to expand...

The Supreme HF, and almost all waterblocks on the market have G1/4 threads which allow you to use whichever fittings you want that will suit the tubing.

The nickel plating is only really worth it if any of the other components are aluminium internally, or whether you really want nickel because you're trying to go for a certain style.

The best way to clean the components seems to be plain hot (not boiling) water run through the components a few times, then a final rinse with cold.
 
Marvin said:
T

The best way to clean the components seems to be plain hot (not boiling) water run through the components a few times, then a final rinse with cold.
Click to expand...

I would recommend rinsing it with distilled water to get rid of any potential minerals the water left.
 
You must log in or register to reply here.
Back
Top Bottom