Associate
- Joined
- 13 Jan 2014
- Posts
- 102
So my rm750x (2018 model) comes with 2 x daisy chain 8 pin cables for a GPU. Will i run into problems if I buy a 3080 with 3x8pin connections as I'll have to use one of the daisy chains?
Thanks
Thanks
RM750x daisy chain question :s
- Thread starter gearsplayer
- Start date
PCIe card specification calls for 150W of power per 8 pin connector.
So two cables with some power taken from slot would be good.
Just don't go overvolting card, unless real consumption measured by TechPowerUp etc is lower than stated 320W figure.
Drawing too much power from single daisy chained connectors cable isn't good:
https://www.overclockers.co.uk/foru...uality-psu-and-check-replace-if-old.18896875/
So two cables with some power taken from slot would be good.
Just don't go overvolting card, unless real consumption measured by TechPowerUp etc is lower than stated 320W figure.
Drawing too much power from single daisy chained connectors cable isn't good:
https://www.overclockers.co.uk/foru...uality-psu-and-check-replace-if-old.18896875/