Ryzen 5 1600 + Asus GTX 1070 Expedition 8GB Low FPS

gurf · 19 May 2017 at 20:49

Hello everyone,

I seem to have a problem with my new GPU.

Namely whenever I run any benchmarks I get FPS of ~80-90 and the scores in various benchmarks are rather underperforming for the hardware I am using.

Definitely far worse than others found on youtube/forums/articles etc.

This is the Unigine Heaven (which weirdly shows only 4GB memory??):

Cinebench:

and CPU:

And my HWMonitor (idle):

The drivers have been cleanly installed before for example unigine, no big difference. All settings are stock.

Any ideas?

gurf · 19 May 2017 at 22:46

I cannot determine the memory.

This is what I get at CPU-Z. Since it's dual channel does that mean it runs at 2133mhz? The memory I purchased is Corsair Vengeance LPX 2x8GB advertised as 3000Mhz.

Also the clocks do not match the ones on the memory. https://www.overclockers.co.uk/cors...hannel-kit-white-cmk16gx4m2b30-my-484-cs.html

gurf · 19 May 2017 at 23:09

I have loaded XMP profile in BIOS.

I have made my "personal best" at 96.53FPS.

However my main problem with the cinebench for example was - I ran it on my work PC - i7-7600, 24GB ram and GTX750 Ti and I ended up with a 145FPS score. Would it be due to different DirectX version?

Edit.

That is interesting now - after loading the XMP profile I have restarted PC few times - It has now beeped three times and rebooted before fully booting.

gurf · 19 May 2017 at 23:21

CPU is approx 60 and GPU goes up to 75.

DX11 at work.

gurf · 20 May 2017 at 00:04

I have read somewhere that apparently overclocking the CPU slightly might increase overall voltage or whatnot and stabilise the system?

I am completely green to it except for knowing my boundaries - no more than 1.350V on RAM and no more than 1.400V on CPU and in case of ryzen no more than 3.9Ghz (I wouldn't go beyond 3.8 just to be safe).

gurf · 20 May 2017 at 08:20

Ok will do, thank you as ever.