Hi guys I've finally finished putting together my new rig here's a few pic's & the spec's:
Nzxt Phantom
Asus P8p67 pro (Bios was 0402 flashed to 1053beta) now running 1003
I7 2600k
2 x 2gb Corsair Xms3 1600c9
His 6950 (Driver 10.12)
Thermalright Venomous X (120mm Apache on way) impressed with the mounting system
Corsair hx620
Samsung F3 1tb
Samsung SH-B123
Windows 7 64bit Home Premium
I've still alittle tidying to do in the case but im finding the cable management excellent.
I set the BCLK to 100 as advised by OCUK, also the memory to 1600mhz & 1.5 DRAM, everything else is set to auto at the moment, I managed a smooth windows install with these settings.
I now seem to be getting a issue with the memory LED lighting up red now & again & no post then when it does eventually post its saying overclocking failed, runs fine after this *EDIT* seems to post fine with memory set a 1333mhz 9 9 9 24 2t at 1.5v will not run at 1600mhz 1.5v or 1.55, another strange thing is it seems to halt when powering up!
Nzxt Phantom
Asus P8p67 pro (Bios was 0402 flashed to 1053beta) now running 1003
I7 2600k
2 x 2gb Corsair Xms3 1600c9
His 6950 (Driver 10.12)
Thermalright Venomous X (120mm Apache on way) impressed with the mounting system
Corsair hx620
Samsung F3 1tb
Samsung SH-B123
Windows 7 64bit Home Premium
I've still alittle tidying to do in the case but im finding the cable management excellent.
I set the BCLK to 100 as advised by OCUK, also the memory to 1600mhz & 1.5 DRAM, everything else is set to auto at the moment, I managed a smooth windows install with these settings.
I now seem to be getting a issue with the memory LED lighting up red now & again & no post then when it does eventually post its saying overclocking failed, runs fine after this *EDIT* seems to post fine with memory set a 1333mhz 9 9 9 24 2t at 1.5v will not run at 1600mhz 1.5v or 1.55, another strange thing is it seems to halt when powering up!
Last edited:
