• Notice regarding image hosts and attachments. See here.

SATA I VS SATA II

Associate
Joined
28 Apr 2007
Posts
22
Location
UK
Hi Guys,

I am trying to compile a list of stuff i need to finish off my new system and am confused about the SATA I / SATA II situation..

Is it backwards compatible? I.E in a similar way to 'older' USB1 and 'newer' USB2 devices use the same cables?

The reason i ask is that i am ordering some SATA cables and need to know if i should be getting SATA I or SATA II...

I will be using the following devices:

2 X Western Digital Raptor 10,000rpm Drives (74Gb)
2 X Seagate Barracuda 7200.10 Drives (320Gb)

2 X Samsung SH-183LBEBN 18x18 DVD±RW Dual Layer Serial ATA Lightscribe ReWriter

I already have 8 or so various sizes (lengths) of SATA II cables that i ordered last week, so really, i just need to know if i should be getting some SATA I cables to use with things like the Seagates or the Samsung Optical drives etc...

Thanks for your help chaps (and the few chapess's that are around ;)

Cheers

Andy
 
The cables are all the same. You may find that on the SATA II drives you need to set/remove a jumper on the drive to enable the faster transfer speed, but that's it really.
 
Technically there is no such thing as SATA II, there are optional extras for the 'enhanced' SATA standard but none are compulsory. There is a sticky in the Hard Drive sub-forum to explain but as TheVoice says the cables are the same and some drives have jumpers to enable/disable 300MB/s transfer speeds if the motherboard doesn't autonegotiate the correct speed (Hitachi use a program to update the firmware). :)
 
Ok cool, thanks guys...

That means i can buy a few more "SATA II" cables for my other devices and have them matching, wanted to use different colours for the Optical drives than the Hard Drives but now i know both drives will work with the cables that are listed as "SATA II"..

Thanks again for your help.

Cheers

Andy
 
Back
Top Bottom