• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Second 5870 need some help =]

Associate
Joined
16 Dec 2009
Posts
723
Location
Bolton
Hi I just bought a second 5870 GPU I got it cheap on ebay it wont be here for another week. Now my system is watercooled so I'm going to use the GPU on my LAN PC first to make sure it works. In the mean time I have a slight problem which I totally didnt think of before I made the purchase.

You see I own a Jeantech Storm 700Watt PSU which supports SLI and Crossfire.

http://www.jeantech.com/storm.htm <-- Here is my PSU and its specs.

It says its crossfire but it only has 2 6pin PCI-E connector slots. "you can see them marked red". Now what is strange my PSU came with 4 PCI-E power cables but I dont understand where I can put them?

Have I gone completely insane because I have no idea why they would give you 4 cables if you can only use 2. :S

Anyway if I cannot use them anywhere else in the PSU which I presume I cant will using PCI-E to Molex connectors for my second GPU bottleneck it in some form?

Thanks for reading =]

-SKENG-
 
just get some duel 6 pin power cables.. so u get 2 x 6pin comming from 1 red connector slot, thats the type that was supplied with my psu, seems strange they'd give you 4 single cables unless theres a 2 into 1 connector block in with ur cables that youve overlooked
 
Last edited:
Could have just been a mistake, free cables so stop complaining ;)
Also some cards will only require 1 4/6pin.

As for the molex adapter that should be fine. Although as a lot of people will say, adapters aren't the best solution as this will just be adding another piece of equipment that could **** up the card.
 
If connections are a problem you can use molex convertors to supply the additional power but frankly if you down to using molex convertors on a top end video card then it’s time to get a new PSU.

I’m more impressed by the fact that a Jentech 750watt can actually run a single HD5870 based setup without blowing up and taking half the PC with it.
 
just get some duel 6 pin power cables.. so u get 2 x 6pin comming from 1 red connector slot, thats the type that was supplied with my psu, seems strange they'd give you 4 single cables unless theres a 2 into 1 connector block in with ur cables that youve overlooked

Ah sweet didnt know they made those you just saved me a lot of cash thanks :D
 
If connections are a problem you can use molex convertors to supply the additional power but frankly if you down to using molex convertors on a top end video card then it’s time to get a new PSU.

I’m more impressed by the fact that a Jentech 750watt can actually run a single HD5870 based setup without blowing up and taking half the PC with it.

This^^.

Buy a decent branded psu,or it's gonna cost a lot,*when* it goes bang,and takes out most/all of your kit.
 
Back
Top Bottom