setting Geil ULL

JoeDredd · 24 Feb 2008 at 17:47

HI all

I have tried to set the ram as it states (4-4-4-12 @ 2.1v) but everytime I manually set it the computer locks up and wont start up correctly, does anyone have any ideas what I am doing wrong??

Set up as per sig, and as yet no OC done just wish to have mem set right first

Cob · 24 Feb 2008 at 17:51

Is the memory multiplier set to x3.0, and the memory overvoltage set to +0.3v?

JoeDredd · 24 Feb 2008 at 18:02

Cob said:
Is the memory multiplier set to x3.0, and the memory overvoltage set to +0.3v?

Yes the mem over volt was set to +0.3, but No the mem multiplier was not set to x3.0........why do I find the multiplier in my bios????

Cob · 24 Feb 2008 at 20:09

It should be in the MIT menu with the other overclocking options (press Enter on the option and go up and down the sub-menu to find x3.0).

JoeDredd · 27 Feb 2008 at 09:56

Cob said:
It should be in the MIT menu with the other overclocking options (press Enter on the option and go up and down the sub-menu to find x3.0).

Thanks Cob I will give this a go and will let you know if this works or not.

JoeDredd · 27 Feb 2008 at 10:39

Cob said:
It should be in the MIT menu with the other overclocking options (press Enter on the option and go up and down the sub-menu to find x3.0).

THANKS COB

I have just done it and everything works, is there any tests that I should do, now mem is working as it should be.....memtest perhaps :confused:

In CPUZ under FSB/DRAM it is 2:3 is this correct or should I also change this??? If so where abouts in BIOS should I be looking. Sorry for all the questions but getting excited as this is my first build and would like to OC and see how far I can get, but at the moment my temps are too high (CPU) in comparison to others, looking at upgrading HSF, but getting mem set up correctly is a bonus and a learning curve.