**** Show Off Your CORSAIR 800D ****

_lecro_ said:
Sounds like a deal m8,
IM sure no one would complain at droppin a quid in yea paypal account for doing them :)
Click to expand...

No worries, will work on it tomorrow for you. Paper I have is matt finish, but I guess it could be laminated 1 side. Will see what I can do.

What I did manage to find with some digging around is a PDF containing all of the Corsair logos in vector format.

Will make life so much easier :)
 
This gives you some idea of how handy finding the proper vector logo will make things...

HXlogo.png
 
_lecro_ said:
No worries m8 the original is kinda matt finish..
im sure someone will post a good quality pic
Click to expand...

Sorry for the delay getting this sorted, but I have been up to my eyes.

EDIT - It's okay I worked it out. Will print one in a minute and see.

EDIT2 - 1st printed version wasn't that great, but then I did print it on my laser. Will try running one off tomorrow on the old inkjet and see how it turns out, although I only have a very old Epson 830.

Perhaps if you have a good inkjet printer I can send you some of the paper and a PDF of the label and you could print it off yourself?
 
Last edited:
Generious said:
here's mine moved the parts from a TJ07 into this 800d.
Love the case so much room in it, really is a great case to work with.
Click to expand...

Could you post a daylight shot of your case, I'd like to see how you fit the bottom rad and how the reses fit in. Also, how do you get air into the case as the bottom intake is blocked by the pumps, are you relying just on the top rad as an intake? Whaich was the the bottom rad airflow going?
 
Bubo said:
Could you post a daylight shot of your case, I'd like to see how you fit the bottom rad and how the reses fit in. Also, how do you get air into the case as the bottom intake is blocked by the pumps, are you relying just on the top rad as an intake? Whaich was the the bottom rad airflow going?
Click to expand...

Think I might still have a daylight shot knocking around will lash that up later on.
The Fan down in the bottom underneath the pumps has been pulled out, due to Radiator sitting in the bottom compartment, and it has now been installed on the bottom drive cage again pushing.

I'm pushing air from the rads in the bottom straight out the back(the Panel without the window has been cut I have put a grill there instead with two more sythe kaza's pulling)

The top is extremely how should I put it limited on space with a Feser 480 Rad up there, about 1.5/2.0cm clearance from the front I/O panel.
nothing installed in the next drive bay due to clearance and the cabling from the IO panel.
Underneath the I/O panel I have installed a zalman fan controller.
Underneath that I have a EK spinner reservoir, and then finally a dvd drive in the last bay.

The top again has been chopped and another grill will be installed tomorrow once it's delivered using the 480 was a last minute change instead of using my old PA120.3.

Temps are pretty decent at the moment normally have it clocked between 3.8 up to 4.1Ghz using a 21.0 multi, idle temps are always around the 30/33
The evga 260 is clocked at 702/1513/1060 temp of 32
 
Last edited:
Okay _lecro_ and anyone else interested, I think I have sussed the labels. Needs 2 passes through my laser to get a nice finish.

Not perfect, but doesn't look too bad to me...
img1635l.jpg


Excuse the slight loss of quality when resizing the image, but you get the idea.

The label above is printed on the self adhesive paper and has a matt finish. I think behind the window in the case it will look great.

I see the red looks a little rough on screen, but that's just the pic/resizing, will try to take a better one tomorrow in daylight.

EDIT - Just for everyone's info, these are now a breeze to do...
hx620multi.png
hx520multi.png


tx650multi.png
hx850multi.png
 
Last edited:
Here is my newly built system:
The specs are
i7 920 OC'ed to 4GHZ
Asus P6TD Deluxe Motherboard
Corsair XMS3 6GB (3x2GB) DDR3 PC3-12800C9 (1600MHz) Tri-Channel
Corsair H50 Water cooler
Corsair HX 850 Modular PSU
Corsair 800D case
Nvidia Geforce 8800GTX graphics card
Thermalright HR-03-GT VGA Cooler
Old Pioneer 110 Dual Layer DVD burner
Creative X-fi Music Extreme Soundcard
Upgraded from the system in my signature and the difference is amazing!!











 
Last edited:
morpheus9394 said:
Here is my newly built system:
The specs are
i7 920 OC'ed to 4GHZ
Asus P6TD Deluxe Motherboard
Corsair XMS3 6GB (3x2GB) DDR3 PC3-12800C9 (1600MHz) Tri-Channel
Corsair H50 Water cooler
Corsair HX 850 Modular PSU
Corsair 800D case
Nvidia Geforce 8800GTX graphics card
Thermalright HR-03-GT VGA Cooler
Old Pioneer 110 Dual Layer DVD burner
Creative X-fi Music Extreme Soundcard
Upgraded from the system in my signature and the difference is amazing!!
Click to expand...


Nice cable management - although VGA cooler is hideous imo /:
 
Only recently bought a HAF 932, great case ! but no dust filters.

So...this baby arrived this morning. How is the dust filter in the bottom, effective ?

I've put 3 x Apache Super Silent 120mm Fans in the top, how are the other corsair fans, quiet ?

I'll be swapping everything at the weekend -hopefully- if my phone doesn't stop ringing, and put some nice pics up.

Thanks.

I find putting the titan fenrir, blowing up than across to more effective as well.
 
[Death];15946001 said:
just ordered 1 of these along with an i7 setup, whats the correct airflow for the fans (front in , h50 in ) ect, or is it all set when bought?
Click to expand...

You should have the fan for the H50 set to intake.
Here is a video made by Corsair which shows you have to install the H50 and how to setup the fans. Very easy to follow.
The case and the H50 are great to work with. I have been build PCs for 20yrs now (damn I feel old) and this case is by far the best. So the sheer size makes it very easy to install everything and the cable management is a VERY VERY easy.
 
You must log in or register to reply here.
Back
Top Bottom