• Notice regarding image hosts and attachments. See here.

Snapped Flash Pen... Ohh Dear

Associate
Joined
8 Jun 2008
Posts
652
Location
Stoke-On-Trent
Yup snapped, Right next to the USB connection at the end. Problem is i could do with some of the data off (Not life threatening but will save me a good weeks worth of work) and was wondering if there's anyway to get data off it since none of the little storage thingy's are damaged.

Thanks :)
 
Well if i wiggle it just right i can see my data on there for a split second before it looses connection. But doing that over and over just makes the crack worsen (Its still hanging in there, Just about, but its ready to fall apart).
 
Stuck it in the computer doing design work, Sat down and caught my knee on it shattering the casing. Wont ever do it again that's for sure.
 
Ouch. Other than suggesting a very fine, conductive ink pen [I'm sure I've seen those - like silver based paint in a pen] and a magnifying glass, I can't really offer any advice.

Could be worse - I had a 16gb USB pen with loads of CD/DVD images on it. Popped it into a mates cheapy eMachines box to back up some of their data in preperation to rebuildin their machine, and it would see the 'drive' in Disk management, but no actual storage [IE like a CF Adapter with no card in it] - that was utterly, utterly gutting as there is absolutely no coming back from that - at least you could contact a data recovery company [or the manufacturer] and see if they can help you get the data off!

Christ knows, if my works USB pen died with a few weeks worth of work on it [I never put anything on the works pen without ensuring it's backed up, for what it's worth - no help to you now I know...] I'd just curl up in a corner with a bottle of vodka and cry for a few hours :(
 
Well looks like i've got myself a little project to keep myself occupied then, its quite lucky i backed the data on there up only a week before. Problem is, in that week i spent several nights perfecting my coursework. Ahh well, Its certainly a valid reason to have slightly late coursework.
 
try plugging it in and very gently moving it till its detected, and awkwardly hold it there while you copypaste your data somewhere quick. ive done it before but got pretty bad cramp doing so :D
 
Get the soldering iron out! I have a cheap one just for when this **** happens.

Not as bad as one my colleague had, his melted in a machine we were repairing, it has his fingerprint in it now.
 
I fixed mine with a soldering iron in a pillar drill, believe it or not. Secure the soldering iron in the chuck, and the flash drive in the base, then adjust the base using tiny adjustments, and solder the USB key onto the PCB. Much easier than trying to keep a steady hand. Just don't turn the drill on. :)
 
I fixed mine with a soldering iron in a pillar drill, believe it or not. Secure the soldering iron in the chuck, and the flash drive in the base, then adjust the base using tiny adjustments, and solder the USB key onto the PCB. Much easier than trying to keep a steady hand. Just don't turn the drill on. :)

unless the drill made contact with the pen, spinning it and flying it across the room embedding in someones skull, which, would be, damn hilarious.

take danneh's advice and get the damn drills out!
 
Back
Top Bottom