So you want to buy a new case then?

Status
Not open for further replies.
Soldato
Joined
9 Nov 2003
Posts
17,699
Location
Leeds
UP TO DATE VERSION HERE

So you want to buy a new case?

Cases, they are a much harder choice to make than a graphics card or processor, you just buy the best in your budget and use reviews for to find out the best performer. With cases this it is not quite as easy.

Reviews for cases can be hit or miss; you need to get a reviewer doing a roundup who has the same taste in cases as you for any chance of getting a true reflection of what the case will be like from your perspective.

All cases you buy are a purely subjective purchase, you have to like the looks and the interior and whatever anyone else says about the case you like the look of it is safe to ignore it most of the time, you’re the one who has to live with the looks.

When you’re choosing your case it comes down to four areas in the sub £500 case category.

• All aluminium cases with subtle styling.
• Gaming cases with outrageous looks that make them the centre of attention.
• Low noise solutions
• Value Cases


All of these choices for your case are perfectly good ones, and are equally capable of holding a computer at comfortable temperatures with reasonable noise levels, whichever you buy.

Aluminium Cases:


alucase.jpg


Firstly I will deal with my personal favourite area of cases, the subtly styled all aluminium cases. I will make this as fair as I can for each; although I am only human as some of you seem to imagine my house being made of aluminium, I assure you it is not!

Aluminium cases are designed to make a statement, same as gaming cases are, they sit in a room with the pc in them chugging away complementing almost any styling. They very rarely stand out to much from the surroundings. They will fit into living rooms, kitchens or bedrooms perfectly fine – they just complement their surroundings well due to the subtle styling.

The cooling on them is usually of a high standard, and the build quality is second to none from the likes of Lian Li and Silverstone.

The downside with all aluminium cases is that sometimes they resonate, but this can be easily sorted and it has been covered quite a few times in the forums.

The pricing of these cases is typically higher than that of the others, due to the all aluminium designs. They hardly ever have more than one new innovation per case and like to play things safe, so you are sure to get a good case, although there are some turkeys out there.

The manufacturers and the case ranges you should be looking at are:

• Silverstone Temjin (TJ) & Lascala (LC)
• Lian Li PC & V series
• Coolermaster ATCS, Praetorian & Wavemaster
http://www.coolermaster-europe.com/index.php

Gaming Cases:

gamingcase.jpg


Gaming cases are also made to make a statement, they sit in a room and are the focal point, the aim in their design is to get the ‘look at me I am different’ factor, and with this most of them succeed.

The cooling in these cases can be hit and miss, as long as you buy a good one then you're set for the best cooling possible with air in a pc case. You need to make sure you look out for at least two 120mm fans. Aluminium construction is a possible plus point for weight, but don’t buy into the helps the cooling, as it really does not help that much at all.

The downside with gaming cases is that the construction is sometimes more prone to being suspect, with cheap plastics and sharp edges a common feature in these cases. The plastic however can be a plus point, as it can aid the designers in making colourful and standout designs.

The manufacturers you should keep an eye on for gaming cases are:

• NZXT
• Chenbro
• Thermaltake
• A-Top
http://www.a-top.com/main.html


Low Noise Cases:

noisecase.jpg


These are perhaps the hardest type of cases to choose from, as any case can be made silent, but these are the cases which out of the box strive to make the system they hold as quiet as possible.

They are great for the living room, or for if you just don’t like noise at all and don’t have the time to modify a normal case by choosing specific cooling to make it near silent; these cases generally make the best of a bad situation.

The cooling in these cases can come second, but usually a happy medium is reached. They may be heavy depending on if they have any noise dampening material fitted (sometimes available as a pre-cut aftermarket kit).

The downside with these cases is that they usually cost slightly more for the noise privileges and can be heavy; the build quality on these cases is generally very good with very few cases having sharp edges as a hazard during construction.

The manufacturers you should take a peak at are:
• Antec (Sonata and P series)
• Artic Cooling


Value Cases:


valuecase.jpg


These are the low end of the case market. Ideally you should avoid putting any seriously high powered rigs in these. They can be good, but a large proportion of these cases are not suitable for most modern systems.

You have to be careful as almost all of these cases have sharp edges, its how they keep the costs down.

If there is one thing you take note of out of this FAQ for cases, it is this; when buying a cheap case with a power supply bundled, be very wary of it. The case costs £22 with a 500w power supply for example, seems like a good buy doesn’t it! Its not, the power supplies that come with these cases under any strain will fail and take most of the pc with them, although for a old Pentium 3 or below system they should be fine.

These cases are what you would class as your typical cases that everyone has, nothing special but get the job done. Very few cool well without making modifications. and very few are quiet without adding in aftermarket solutions.

You are most likely to find these beasts in the own branded case sections from online retailers, and of course OcUK stocks a range of these, from the cheap and cheerful £20 upwards.

However I will stress, buying a specialised case over a value case is a worthwhile investment, as is a mouse, keyboard and monitor. It is these that you interface with, and a good case enables you to use your pc and overall promotes that your pc is a expensive piece of equipment. Non-technical people make their assumptions on the power of the pc from the box.

The link to the best value cases, as they are almost all the same:

• Overclockers UK


If you need to see some other cases, or ideas check out the Cases Gallery

Hope this can be of help to some people. ~Yewen
With thanks to Noxi for the help with idea of adding a value section.
 
Last edited:
Nice guide you've put together there should come in very handy for beginners, would be useful as a sticky?. Is it just me or do the red titles make your eyes hurt though :eek: .

Mark
 
Cheers guys, Ill change the red to a green, anything else you think should be added, I have deliverately not added in value cases, as the point of them is pure value :)
 
Yewen said:
I have deliverately not added in value cases, as the point of them is pure value :)

You know my opinion on this one Yewen, but i DO believe value should be in there.

Yes, their point is value - but my point is that a lot of supposed value cases are not - they are just plain cheap.

If you could give some guidance as to value case manufacturers (or just a few instances of cases) which provide good value, i think it would add to this guides usefulness.

M
 
Ok mate, you win I will fill your request, just gotta make a few other alterations that Baddass has picked up on, and then It will be done.

Check back in a hour and I will have it ready for you to proof read if you would be so kind :)
 
Its only a rough guide Raikiri, and I know they are brilliant cases, just it would mean having to link to a page with some OcUK competitors on.

Ive also avoided mentioning specific products to avoid having to have the guide updated monthly.
 
i've left this thread here in case there are other suggestions people want to make about the guide which Yewen has kindly written. Yewen, ive added it into a post for you in the sticky, which you are able to edit (since it's your post) and add / change things when you want to or after suggesitons in this thread :)
 
Yewen said:
Its only a rough guide Raikiri, and I know they are brilliant cases, just it would mean having to link to a page with some OcUK competitors on.

Ive also avoided mentioning specific products to avoid having to have the guide updated monthly.

ok cool :)
 
Cheers for the input, no other colour but white will do clearly!

So shut ya whinging :D Its been stickified thanks to baddass, hes also done the case gallery so its now viewable. Incase nobody has noticed hes been doing a lot of work in cases cleaning it up. So nice one mate :)
 
My only comment would be that you clearly HAVE to add the Akasa Eclipse to your list of Aluminium cases. ;)

I also didn't notice anything about microATX vs ATX vs BTX vs ITX vs SFF etc. which I think would be needed for total completion.
 
Last edited:
I am currently writing that about the form factors mate! Doing the complete case guide slowly and steadily; I am not that quick a writer to attempt to knock it all off in one go!

ANd the eclipse, as I said it is a very rough guide intended to wet the apetites of people, I have only mentioned case makers and a short list at that, if you check the sticky they are mentioned about the case guide, so people do get a opertunity to check them out.

Just dont want to put specific cases in the sticky, as then I would have to keep it up to date a lot, and I might not have time then to do it!

I just covered ATX as its my main area, and the main area for 98% of the people, but I am going to write a bit on the competing form factors and add it to the sticky. Ill post it up and ask for opinions first :)

WJA96 bar thoose listed and extended ATX can you think of any other major motherboard types?
 
Status
Not open for further replies.
Back
Top Bottom