Solar panel production figures

DRZ said:
Suggested doubt? I think you've taken that humour the wrong way :) The only doubt was that there's no way I topped the table with only 35.1kWh!
Click to expand...
Apologies then, interpreted as implied!

Ron-ski said:
I took it to mean that there is those that don't upload, or don't upload live to PV Output, no doubt, just a fact.

We also forget that Give me sunshine has two systems on the same house, but shown separately, and also doesn't up load live either.

On that impressive picture I don't see the gable wall?

PS Much better generation today.
Click to expand...
Gable wall installed cable run to finish, 3 panels still to add to the garden gym roof, finally two panels to change on the shed to match the output of the ones they're being connected to.

I will update the Tigo app once everything is connected.

Edit: forgot generation 48.4 kWh
 
Last edited:
21.70Kwh made on the house battery is full water is hot and exported 7.10Kwh
Workshop made 7.50Kwh battery is full and exported 1Kwh

House System is East West
down in not so sunny Devon.
East 8 x 420w panels 45 deg pitch
West 10 x 420w panels 45 deg pitch
Givenergy Gen3 5kwh hybrid
2 x 9.5 battery's

Workshop system is South/East
2440w of panels two 720w strings
one 1000w string
Hybrid inverter with 4x 12v 100Amp
Battery's
Plus grid tie inverter as well
 
I had a decent start to the day but I’ve been consuming power from the batteries all afternoon, so while the figures look bad the reality is worse. Would have been nice to have it spread over the day but oh well!

16.9kWh generated, 5.7 exported.
 
father-ted said:
How do I add my system to that please?
Click to expand...

I've no idea with regards to a Tesla system, but did find these links.

forum.pvoutput.org

Powerwall2PVOutput

Members, I have added a home project to Github if any one is looking at pushing data to PVO from their Powerwall 2. Currently in Beta, would appreciate any feedback. Cheers ekul
forum.pvoutput.org forum.pvoutput.org
forum.pvoutput.org

Set up for an average guy with solar and a powerwall

I just signed up and maybe this is not for me. I am not a programmer by any means. Is there a simple step by step set up guide for this or is it designed more for the programmer, engineer someone that know what they are doing Does The system collect usage data automatically or does one have to...
forum.pvoutput.org forum.pvoutput.org
 
You must log in or register to reply here.
Back
Top Bottom