Speaker cable?

Razor-BladE

Razor-BladE

Razor-BladE

Soldato
Joined
15 Feb 2009
Posts
4,304
Location
Bristol
So it's my first steps into proper speakers and I've recently bought myself some Wharfedale 10.1s. I was originally looking for 9.1s but these popped up at a reasonable price so I thought they can't sound any worse!

So I'll be getting them either this week or the week after, and I'll be looking to get a nice budget but apparently quite decent Cambridge Audio A5.

As the A5 can bi-amp, I'm going to get 8 banana plugs and 8 spade connectors, a 3.5mm-phono, and obviously I'll need some speaker cable.

Now I've looked into this briefly and there's seems to be a lot of choice with what to get.

I'm looking for some cheap but not too cheap speaker cable but I have no idea what to get, so if someone get point me to products or a site where any cable will do, etc, that would be great. QED the one to go for as I see them mentioned sometimes?

I don't really know how much I'll need.. the amp will be right next to the speakers so probably about 80cm from the furthest? Meaning I'll need to get about 3.5m of the stuff?

Should the cable length be the same for both speakers even though one is closer than the other? Or is the phase difference not significant enough to make a difference?

Sorry for so many questions. Thanks!
 
Thanks all. Keep the recommendations coming in :)

jbloggs said:
For speaker cable, I have used both This
Click to expand...

That looks pretty good. I'll put that onto my list.

Jano;19588144I said:
wouldn't bother going straight to Bi-Amping
also wouldn't bother with banana plugs either.
Click to expand...

a1ex2001 said:
Don't bother with the bananas or spades they are a waste of money unless you are planning on taking the system apart all the time.

Personally I wouldn't bother bi-wiring unless you plan on bi-amping at a latter date. I have my speakers bi-wired but only because I ran the cable ready for the power amp upgrade I've never gotten round too!
Click to expand...

Alright I won't buy banana plugs/spade connectors, that'll save me £20 as well. Do I just wrap it around or something?

I won't bi-amp then; save me the cost of a set of speaker cable.
 
Last edited:
Chong Warrior said:
I have my system Bi-Amped and it cetainly does make a difference at higher volumes. Though mine are large floorstanders, I probably wouldn't bother with bookshelf speakers.

You can do it cheaply, no need to spend a fortune.
I use this cable
Click to expand...

I doubt I'll play it too loudly so I won't go bi-amped.

Is that cable specifically for bi-amp?


Edit: Does the width of the wire make a big difference?
 
ampback.jpg


I thought that is bi-amping?
 
Ah kl, cheers.

I thought bi-wire was 4 outputs from the amp splitting into 8 cables haha.

Ah that's why I was going for the A5.. still a decent amp for about £40 right?
 
Ok brilliant. I think I'm gonna go for the Fisual Super Pearl speaker cable.
Does it matter which connectors I use for the speakers?
And what about the links?
 
Jano said:
From that pic, it looks like you should use the connections at the bottom.

Also from your previous post it sounds like you haven't wired an amp up before, there should be a hole for you to feed the wire through, then you just tighten up the connections which holds it in place. No need to wrap the wire around anything.
Click to expand...

Ah I meant on the speakers themselves?

Nope I haven't. Ok then, thanks. Is that the same for the speaker side?
 
You must log in or register to reply here.
Back
Top Bottom