Spec Check Please?

Dodger said:
Posted a picture in the Case Gallery and have been advised to rotate the CPU Cooler 180 degrees as its currently setup incorrectly.

Mean's reseating CPU Cooler and taking out a few components but nothing too major :)
Click to expand...

Reapplying paste as well ?
 
stulid said:
Nearly all fans I have used have a pair if arrows molded into the side of the frame showing direction of rotation and direction of airflow.
Click to expand...

I'm at work at the moment so will have to check when I get home...I am guessing the direction of the arrows is pointing to the right.

What would you advise if the above proves to be true?
 
blow towards the back of the case
as your dust filters are on the front :)

i dont think you will need to remount it tho, no biggy
 
An update, I did not have to remount the CPU Cooler which was good, I just turned around the fans and now the arrows on the fans are pointing to the left which I now believe is correct.

I will post up a picture soon :)
 
Totally Dubbed said:
If you need fan recommendations:
The fractal makes one hell of a NOISE when put at the TOP of the case.
I got 2x Corsair AF120's - they run at around 900rpm on full load, max being 1100 rpm.
They are SUPER quiet and are very nice - only downside is that they are 120mm not 140mm
Click to expand...


TD, I agree, when I put the fans on top speed, the PC makes a lot of noise. When I put the fans on the lowest settings, I cannot even hear the PC.

I will be getting new fans.

Where have you got your 2xCorsair AF120's? Are they both located at the front?

Have you left the default fan at the back of the case untouched? Or have you replaced that too?

With regards to your Fan Controller on the case, which fans in the case have you got plugged into the controller?

Is your CPU Cooler plugged into the motherboard directly or into the fan controller?
 
Bro, i suggest you wait till the end of the week, as I'll be getting in the af140s instead.
I'm going to return the af120s, as they don't fill the whole fan space, as they are 120mm, whilst the holes are 140mm.

As for fan controller:
Only the fractals are on it, thus the front two are.
For the time being that is.

Cpu cooler is plugged into the motherboard.

Other fan etc I'm not sure myself at the moment, but i got:
2x fractal at the front as intake.
1x corsair at the top as out
And my 2x antec at the back.

I'm contemplating having another one on the side as intake. And maybe flipping my top one to an outtake.

Been asking on the forums...And haven't gotten far. I'll ask elsewhere.
 
Totally Dubbed said:
Bro, i suggest you wait till the end of the week, as I'll be getting in the af140s instead.
I'm going to return the af120s, as they don't fill the whole fan space, as they are 120mm, whilst the holes are 140mm.

As for fan controller:
Only the fractals are on it, thus the front two are.
For the time being that is.

Cpu cooler is plugged into the motherboard.

Other fan etc I'm not sure myself at the moment, but i got:
2x fractal at the front as intake.
1x corsair at the top as out
And my 2x antec at the back.

I'm contemplating having another one on the side as intake. And maybe flipping my top one to an outtake.

Been asking on the forums...And haven't gotten far. I'll ask elsewhere.
Click to expand...


I was thinking of taking out all of the Fractual fans and replacing them with quieter ones e.g. the Corsair AF140.

I'm not saying the PC is not quiet because at 5V and 7V on the Fan Controller, I cannot really hear the PC.

It's only when I put it on 11V that I can hear the fans.


My thinking was to put 2 x Corsair AF140 at the front as Intake.

Then to put 1 x 140mm fan at the bottom of the case with the air pushing up.

Then to put 1 x 140mm fan at the back of the case to take the air all out.

Am I going OTT or? :confused:
 
Dodger said:
I was thinking of taking out all of the Fractual fans and replacing them with quieter ones e.g. the Corsair AF140.

I'm not saying the PC is not quiet because at 5V and 7V on the Fan Controller, I cannot really hear the PC.

It's only when I put it on 11V that I can hear the fans.


My thinking was to put 2 x Corsair AF140 at the front as Intake.

Then to put 1 x 140mm fan at the bottom of the case with the air pushing up.

Then to put 1 x 140mm fan at the back of the case to take the air all out.

Am I going OTT or? :confused:
Click to expand...

That sounds good to me - but I'm not very confident in giving advice about fan and air flow.
All I can say is, not to conflict air flow, by having two fans counter each other.
As for getting rid of the fractals - well I'm on 12v (not 11v :P) but seeing as they are in the front I can't hear them at all.
Of course I can go super quiet, but my antec and even my mini fans ont he z77 make more noise than it.
 
Totally Dubbed said:
That sounds good to me - but I'm not very confident in giving advice about fan and air flow.
All I can say is, not to conflict air flow, by having two fans counter each other.
As for getting rid of the fractals - well I'm on 12v (not 11v :P) but seeing as they are in the front I can't hear them at all.
Of course I can go super quiet, but my antec and even my mini fans ont he z77 make more noise than it.
Click to expand...

I could add 2 x AF140 at the front, and take the Fractual fan at the top front and move it to the bottom of the case pushing air up.

That would be fine but i'm looking for advice with regards to the fans that I already have, and which new fans I need.

Would someone be able to advise please? :)
 
Just to say on the fractals. They don't blend well on metal grills basically. Thus why i have both of mine at the front, where there is no metal grill.
So if i were you i would do as i did with the fractals.
 
You must log in or register to reply here.
Back
Top Bottom