Spec me a NEW case !!!

Associate
Joined
1 Jun 2007
Posts
495
Location
Wolverhampton
Ok i been looking at the antec 900 cause i dont intend on spending more than £100 on a case.Anything about as good or better.

I over clock and have 2 roms 2 drives and a X2 and it gets hot in my case at the moment (cool master wave master old case OcUK used for there pc's).Would like
the psu at the bottom and room for a biggish cpu cooler and has loads of fans already installed got a fan controller already.Am i on the right track with the 900.Its more about great cooling than being pretty tbh.
 
nzxt-tempest.jpg


How about the NZXT Tempest instead?

http://forums.overclockers.co.uk/showthread.php?t=17855549
 
Both look ok and i take it the fans i wanted are in them and the psu in the place i wanted (the bottom) shame one is out of stock and the other not stocked yet.But thanks for the input.
 
Hmm nice case the only thing that puts me of is no fans at the front would like at least 2 for intake at the front of the case will it fit two even if you dont get them?
 
Dunno, one reason is that it runs cooler at the bottom, because it's not sucking up the system heat and expelling it (thus improving efficiency). Personally, I prefer PSU's to be situated at the bottom for aesthetic reasons and it keeps the power cable out of the way at the back.
 
But then your Psu is heating everything above it up, thus killing efficiency of components that matter the most. [maybe im wrong possibley?] :P
 
But then your Psu is heating everything above it up, thus killing efficiency of components that matter the most. [maybe im wrong possibley?] :P

it really makes little difference either way tbh. a decent psu will run so cool and quiet that wether it draws cool air from outside or warm are from inside it'll do the same job without troubles.
 
But then your Psu is heating everything above it up, thus killing efficiency of components that matter the most. [maybe im wrong possibley?] :P

In the P182 (& Silverstone TJ-09, Coolermaster C690; Cosmos), you can face the PSU downwards, so the fan is mounted at the bottom, thus expelling heat straight out of the case. Plus the Antec has a compartmentalised design to stop PSU heat from reaching the motherboard, etc.
 
Last edited:
Back
Top Bottom