Hoping to get some guidance/reassurance this is setup correctly.
Purchased a system and had OCUK build for me initially on including an SSD I have no decided to add another hard drive for storage.
(Gigabyte Z97-Sli - Motherboard)
When opening up the case I could only see 1 Sata Power cable plugged into the Mobo's 6GB Connection which was then powering my SSD and Optical Drive therefore I have disconnected the optical drive due to not using it and then used that Sata power connection for the new HHD. (Is this connected up correctly?)
Once booting into Windows both the Bios and Device manager recognised the HHD (BUT) My Computer didn't pick it up my thoughts are as this was from Members Market and freshly cleaned it wasn't formatted correctly for my boot of Windows.
Therefore I right clicked My Computer > Manage > Disk Management > Found the HHD > Right click > Format > File System NTFS >>>>
Now I have Disc 0 (SSD) 300 Mb Recovery - 99 MB Recovery - C:237GB NTFS Boot,Pagefile,Crash Dump,Primary
and the new HHD Disc 1 - 931.39GB NTFS Primary Partition
IS there anything I need to setup to allow this SSD Boot Drive and Storage device to work optimally side by side does the new HHD need program files etc to be able to run games stored on it?
Hope this makes sense
Purchased a system and had OCUK build for me initially on including an SSD I have no decided to add another hard drive for storage.
(Gigabyte Z97-Sli - Motherboard)
When opening up the case I could only see 1 Sata Power cable plugged into the Mobo's 6GB Connection which was then powering my SSD and Optical Drive therefore I have disconnected the optical drive due to not using it and then used that Sata power connection for the new HHD. (Is this connected up correctly?)
Once booting into Windows both the Bios and Device manager recognised the HHD (BUT) My Computer didn't pick it up my thoughts are as this was from Members Market and freshly cleaned it wasn't formatted correctly for my boot of Windows.
Therefore I right clicked My Computer > Manage > Disk Management > Found the HHD > Right click > Format > File System NTFS >>>>
Now I have Disc 0 (SSD) 300 Mb Recovery - 99 MB Recovery - C:237GB NTFS Boot,Pagefile,Crash Dump,Primary
and the new HHD Disc 1 - 931.39GB NTFS Primary Partition
IS there anything I need to setup to allow this SSD Boot Drive and Storage device to work optimally side by side does the new HHD need program files etc to be able to run games stored on it?
Hope this makes sense

