still got a problem

BaDBoY16

BaDBoY16

BaDBoY16

Associate
Joined
10 Sep 2006
Posts
358
Location
chester
replaced the ram, with team extreme and was working fine went to reboot back at square one, keeps on crashing its once its bin on for abit so is it cpu or mobo all temps ok totlly confused and ****** off here
 
Woah slow down and type properly :p Bit of an incoherant post there ;)

So you had a problem, replaced the ram, but still have the problem?

I guess the problem is the computer crashing, and you're running an E6xxx at 3Ghz?

Have you tried upping the FSB / Chipset voltages slightly? You may need to stick a bit of a higher voltage on the memory if you're overclocking it. Same goes for the CPU..

It's wierd that it only happens after a period of time... I guess something could be getting hot. Is there any airflow in your case, because the mobo will still need some sort of escape route for its heat even if you're water cooled?

Is a reformat an option? Incase it's just software conflicts
 
Ive installed the vista again fresh copy, and ive set everything back down to stock. heat isnt a problem only running at 23 degrees. last night i took everything out put it back in and it still does it. my cpu is the E6400. when i take battery out it boots into bios with the battery in it doesnt get past the striker logo :(
 
You must log in or register to reply here.
Back
Top Bottom