• Notice regarding image hosts and attachments. See here.

Strange boot issue

Associate
Joined
15 Jul 2010
Posts
90
Hi All,

Hope someone could give me some idea of what could be the cause of my strange boot issue, basically everyday when I turn the pc on it will either not boot or it will boot but will BSOD with a random reason soon after the OS loads.

So my habbit now is to turn on then off then back on again and then the pc is perfectly stable, gaming, browsing etc everything i chuck at it and its fine. I do notice that on first boot memory reading is 2gb then after turning off and back on again its back to 6gb.

What I dont get is why its perfectly fine/stable after the 2nd boot attempt, what could be causing this?

I havent really tried anything major apart from reseating the memory and due to my habbit of resolving it i havent been that concerned, but I think its time i did look into it. )

Thanks


My PC spec is -

Intel Core i7 950
Asus P6X58D-E Intel
Corsair XMS3 (3x2GB) DDR3 PC3-12800C9 1600MHz Triple Channel
1GB MSI GTX 460 HAWK Graphics Card x 2
Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive
Samsung SpinPoint F3 1TB SATA-II 32MB Cache
Corsair Professional Series™ Gold AX850
Prolimatech Megahalems Black Anodised Mega Shadow
 
In some cases the cpu cooler being too tight can course loss of memory, it might be worth it and loosen the cooler if this possible, I admit I am not sure on the mount mechanism on the cooler.
 
What is the bsod said as it does normally point to the cause of the issue :) i can help,you from then further and i agree loosen the cooler too, keep the contact tight but which allows a bit of play (eg twist)
 
i should have made a note of the BSOD's I was getting, but there has been so many different variations, I admit when I looked them up it kinda pointed to driver and memory issues.

I did struggle getting the cooler on during my build as one of the threads wouldnt tighten properly, I did manage to tighten it in the end but wasnt easy.

I did read a while back how true it sounds that when you first turn on due to the cold it doesnt make contact hense memory issue, once warm due to the expansion it makes contact hense it been stable, stupid or fact ?

I will reseat the cooler / loosen it.

Thanks for the advice.
 
Back
Top Bottom